Clothes Line Wire Swage Stud 8M 1×19 3.2mm SSWR
This Clothes Line Wire Swage Stud 8M 1×19 3.2mm SSWR kit includes Super Clean wire and an RHT Swage Stud (M6, M5, or 6mm Lag thread) suitable for a stringing a clothes line. In a pack size of 1, there are enough fittings for a single wire run:
- 1 – 8M 1×19 G316 Stainless Steel
- 1 – Swage Terminal Stud
- 1 – Wire Cleaning and Swaging
A pack size of 3 – is therefore enough for 3 wires 🙂
The fittings must use hydraulic swaging – and we do that for you. The 8M of 3.2mm Stainless steel wire rope can be trimmed to fit and have an additional stud swaged on as required. Extra nuts and washers are also available.
Installation of the assembly is simple. Cut the wire to length, add on any nuts or washers and feed the wire through pre-drilled post, swage another terminal on if required, and screw into the post or tighten nut to apply tension.