Nutsert 10-24 RHT Zinc Plated Steel Large Flange Splined place captive nut anchors in sheet, tube or hollow section. Nutserts are also called a Rivet Nut, Rivnut, Captive Nut, or Jack Nut. The Nutsert 10-24 RHT Zinc Plated Steel Large Flanged Splined is Round. Additionally, Nutserts are either open or closed. Large Flange Splined Nutserts are “OPEN”. Open Nutserts are general purpose and form an open tube when installed. Conversely, closed rivnuts for a closed tube when installed. Additionally, rivnuts fit a single thread diameter and pitch. Other fittings such as a washer can used with Rivet Nuts. Rivet Nuts also require proper installation tools for their use.
* * * *
Usage: The Nutsert 10-24RHT Zinc Plated Steel Large Flanged Splined provide a strong captive thread in thin panels. Rivnuts are also recommended in applications where only one side of the panel is accessible. These include such as box or tube section. Rivet Nuts can be installed into panels as thin as 0.5mm. Nutserts do not suffer from the maximum hardness limitations of self-clinching nuts. Consequently, sheetnuts are suitable for installation into hard or non-ductile panels. Our Rivnuts feature “bulge control” technology to accurately control the upset point. Additionally, the multi-grip feature is able to accommodate a much wider grip-range. Available in several materials, our high strength versions offer much improved thread strength.
* * * *
Quality: All Low Cost Wire products meet our strict ISO Quality Standards. Firstly, our products achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Secondly, that long experience with design and manufacturing enables the specification and production of aesthetically beautiful and functional products. Finally, our products have a special electro polished treatment for bright and smooth surface. Therefore our fasteners, fittings, wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…
* * * *
Dimensions: D1= ~ 5.9mm D2 = ~ 4.0mm D3 = ~ 9.0mm H1 = ~ 11.0mm H2 = ~ 5.6mm W = ~ 0.9mm