1300 601 514
Swage Bolt RHT LHT Timber Insert SRTT

$7.27$9.11 Includes GST

Swaged Bolts with Timber Inserts
Swaged Terminal Bolt with Timber Inserts RHT and LHT Diagram assembled
Male Swaged Terminal Bolt RHT
Male Swaged Terminal Bolt LHT
RHT and LHT Timber Inserts
Swaged Terminal Bolts RHT and LHT with Timber Inserts Assembled V1_LR
Swaged Terminal Bolts RHT and LHT with Timber Inserts Assembled_LR
Timber Insert Set 2_LR
Timber Insert Set 3_LR

Swage Bolt RHT LHT Timber Insert SRTT

$7.27$9.11 Includes GST

Clear
SKU: 3204 Categories: , , ,

This kit suits a run of 3.2mm wire of 10 meters or less(hence the SR or Short Run). There is no turnbuckle. Attachments are two M6x1.0 x 40mm (RHT & LHT) Swage Bolts with Timber Inserts to attach directly into Timber posts (hence the TT or Timber to Timber).

Swage Bolt RHT LHT Timber Insert SRTT

Swage Bolt RHT LHT Timber Insert SRTT Kit suits a run of 3.2mm wire of 10 meters or less (hence the SR or Short Run). There is a Right Hand Thread (RHT) & a Left Hand Thread (LHT) Terminal Swage Bolt that form two attachment points in combination with Timber Inserts (also both RHT and LHT). These inserts attach directly into Timber posts (hence the TT or Timber to Timber).

Application

The first end of the run has a RHT Swage Bolt swaged to the wire. This attaches to the first timber post or wall using a RHT Timber Insert. The second end uses an LHT Swage Bolt which is fastened to the second post or wall with the second LHT Timber Insert.

Wire may be installed through the intermediate posts and ‘cut to length’. Please make sure you cut the wire beforehand. It is VERY difficult to ‘cut to size’ once the Terminal Swage Bolts are installed. Drill the intermediate posts out to at least 4mm prior to swaging in place.

Alternately, if you build the wire before you install it, then the length of a wire run is determined by the ‘inside to inside’ post measurement less a fixed amount which represents the distance between the attachment posts ‘taken up’ by the fittings when installed and adjusted properly. This approach will require the intermediate posts to be drilled out to ~8.0mm in order to pass the fittings through. The fixed amount for this kit = 47mm. This number represents the amount we would cut off in the factory to custom build wires with this kit for a given length. We recommend cutting, building, installing and reviewing your installation to ensure that it looks the way YOU want it to look once its complete.

More detailed installation instructions are available here. Please note that we strongly recommend that installation of these kits requires 2 people.

Contents

  • 1 – M6 x 1.0 X 40mm RHT Swage Bolt Stainless Steel 316 Marine Grade
  • 1 – M6 x 1.0 X 40mm LHT Swage Bolt Stainless Steel 316 Marine Grade
  • 1 – M6 x 1.0 X 40mm RHT Timber Insert Stainless Steel 316 Marine Grade
  • 1 – M6 x 1.0 X 40mm LHT Timber Insert Stainless Steel 316 Marine Grade

Characteristics

  • Balustrade Kit for Pack Size Runs/Wire
  • Post Connections  TT (Timber to Timber)
  • Recommended Run Length <10M (SR)
  • Swaging Method:  Hydraulic
  • Wire Structure: 7×7, 1×19
  • Diameter of Wire: 3.0mm, 3.2mm, 4.0mm
  • Thread of Fitting: M6 x 1.0
  • Section Orientation: Flat, Stairs, Angle
  • Wire Orientation in a Section: Horizontal, Vertical

Additional Information

Color

Silver

Material

Stainless Steel

Grade

AISI G316 (Marine)

Wire Structure

7×7, 1×19

Coating

None

Attachment Style

Machine Stud

Attachment Substrate

TImber

Save your Quote
Your Quote will be saved for 30 days and you'll be given a link. Anyone with the link, can use it to retrieve your Quote within that 30 days
Back Save your Quote
Your Shopping Cart will be saved as a Quote with Product pictures and information, and Cart Totals. You can then send it to yourself, or a friend, with a link to retrieve it at any time. Thanks for Looking! ...the LCW Team
Your cart email sent successfully :)