Swage Swage Rigging Screws M6 – 4.0mm G316 Stainless Steel TRADE PACKS

$9.89$969.99 Inc GST

Sale!

Swage Swage Rigging Screws M6 – 4.0mm G316 Stainless Steel TRADE PACKS

$9.89$969.99 Inc GST

Clear

Product Description

Swage Swage Rigging Screws M6 – 4.0mm are ideal fasteners for projects joining stainless steel wire rope. These fasteners put a turnbuckle in the middle of a run.  Consequently, they splice and tighten an existing run. They therefore provide a professional and timeless look. Especially relevant are the both right-hand and left-hand threads. Firstly, these allow the body of the rigging screw to easily provide tension to your wire rope, without bending or stretching the wire. Tighten the body of the rigging screw with a c-spanner by rotating the body clockwise until tensioned to your needs.

****

Usage: The Swage Swage Rigging Screws M6 – 4.0mm will work with few other fittings. They fasten directly to the wire, not an anchor hole. An anchor holes form the frame or area that will contain the wire.  A hydraulic swager crimps the stud to the appropriate diameter of wire rope.  With both right-hand and left-hand threads, the body of the Swage Swage Rigging Screw M6 – 4.0mm can easily provide tension to your wire rope, without bending or stretching the wire. Tighten the body of the rigging screw with a c-spanner by rotating the body clockwise until tensioned to your needs.

* * * *

Quality: All Low Cost Wire products meet our strict ISO Quality Standards. Firstly, our products achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Secondly, that long experience with wire rope manufacturing enables the design and manufacture of aesthetically beautiful and functional products. Finally, our products have a special treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

* * * *

Dimensions: D = ~ 6.0mm d = ~ 6.0mm L = ~ xxx.0mm L1 = ~ xxx.0mm A = ~ 8.0MM

Usage Tips

  • Swage Swage Rigging Screws are ideal fasteners for projects splicing or joining stainless steel wire rope.
  • The swaged bolts allow these fasteners to easily adjust wire  attached to a saddle or lag screw eye.
  • Turnbuckles use both right-hand and left-hand threads. Firstly, these allow the body of the rigging screw to easily provide tension to your wire rope, without bending or stretching the wire.
  •  Tighten the body of the rigging screw with a c-spanner by rotating the body clockwise until tensioned to your needs.
  • The terminal is never fastened to a saddle or a rigging screw on the posts or uprights that form the frame or area that will contain the wire.
  • The rigging screw requires a hydraulic swager to crimp the fitting to the appropriate diameter of wire rope

Installation Considerations

  • Matching alloys is important and avoiding cross contamination is very important.
  • It is recommended that similar alloy fasteners are used so that a dis similar (corrosive) alloy reaction is avoided. Generally G304 Stainless Steel screws are used in timber (counter sunk screws in soft woods and pan head screws in hard woods). Generally, G304 Stainless Steel Rivets are used to attach fittings to metal surfaces (aluminium, mild steel, and stainless steel).
  • It may be necessary to (electrically) isolate and insulate fittings from the substrate material - again to avoid a galvanic (dissimilar alloys) reaction. Nylon washers can be very effective in this regard.
  • Additionally, all fittings and tools mentioned: c-spanner and hydraulic swagers are available through our store as well. These Rigging Screws are primarily sized according to the diameter of wire with which they work. Therefore, they are used in concert with other fittings. Consequently with a similar swaging style - these additional fittings work with the same diameter of wire rope.

Additional Relevant FAQs

Specifications

Pack Size

Single, 10 Pack, 100 Pack, 1000 Pack

Material

Stainless Steel

Grade

AISI G316 (Marine)

Connection Style

Hydraulic Swaging

Wire Diameter

4.0mm

Tension Style

Turnbuckle – Swage/Swage Closed

Dimensions

D = ~ 6.0mm
d = ~ 6.0mm
L = ~ xxx.0mm
L1 = ~ xxx.0mm
A = ~ 8.0MM