1300 601 514
1.0mm Stainless Steel Wire Rope

$0.65$110.21 Includes GST

Stainless Steel Wire Rope Reel
Wire Structures 7x7 7x19 1x19
Stainless Steel Wire Profile
Wire Coil
1x19 Stainless Steel Wire Rope Cross Section
7X7 G316 Stainless Steel Wire Detail
X7 G316 Stainless Steel Wire Profile
7X7 G316 Stainless Steel Wire Structure
7X7 G316 Stainless Steel Wire Reel 100M LCW

1.0mm Stainless Steel Wire Rope

$0.65$110.21 Includes GST

Clear
SKU: 1777 Categories: , ,

1.0mm Marine Grade Stainless Steel Wire Rope. This diameter of Stainless Steel Wire Rope is primarily used in off shore fishing, hanging/display, shop fitting, industrial design and control cables.

Lengths of wire less than 100M are cut and labelled as a coil. Lengths of 150M and above are (generally) delivered on a reel however, small lengths can be put on a drum for a small additional cost (please refer to our Reeling Service

1.0mm Stainless Steel Wire Rope – Marine Grade

This is super easy to use wire for the DIY guy who wants that economical balustrading – used by both Professionals and DIY’s, it is excellent with all fittings however, it is NOT
recommended for coastal or marine applications. Other uses extend to:

  • Picture Hanging
  • Shop Fitting
  • Artistic Installations
  • Trellis structuring
  • ‘Green Wall’ construction
  • Light Hanging
  • Security Cable
  • Prop Construction

…and whatever the creative genius can imagine.

This 1.0mm Stainless Steel Wire Rope is considered a flexible wire making it easy to work with and has virtually no stretch coefficient. Its ease of use makes it excellent for use with Thimble and Ferrule fittings as well as hydraulically swaged fittings.

Please use the combinations of the offered lengths to get the total length for which you search.

E.G. – choose a quantity of “8” of the 10M length to select a single length of 80 Metres.

All quantities of Wire Rope are cut and shipped as a single length unless otherwise specifically ordered with a ‘cut to length’ service. (additional charge per length of wire to cut to a measurement, coil, label, and wrap separately – see our services section on this website).

Our international supplier Mill Certifies their wire rope. And their long experience of wire and rope manufacturing enables them to design and manufacture wire and rope with optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. The added bonus is that they provide a special treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

Wire Structure:

Three common wire strand constructions are:

  • 1×19 indicates 19 thin wires twisted together in a silky and therefore smooth finish. Consequently, 19 individual wires twisted together construct a single strand of our premium wire. This is the least flexible wire structure. As a result, it is the easiest to keep clean.
  • 7×7 indicates a collection of 49 individual wires grouped as 7 sub-strands of 7 wires each. Consequently, 7 wire bundles twisted together form a single strand. This is more (medium) flexible wire than 1×19. As a result, it is for ‘general purpose’ applications and is most economical because it is commonly available.
  • 7×19 indicates a collection of 133 individual wires grouped as 7 sub-strands of 19 wires each. Consequently, 7 wire bundles of 19 wires twisted together form a single strand. This is our most flexible wire for use in rigging or small cranes or winches rather than balustrade construction. Low Cost Wire does not recommend 7×19 wire for balustrade construction.

…In conclusion, the more wires twisted to make a strand, the more flexible is the strand of wire because it deforms/bends without damage.

Specifications:

  • Quality: Marine
  • AISI Grade: 316
  • Lay: Right Hand
  • Swaging Method:  Manual
  • Wire Structure: 7×7, 7×19, 1×19
  • Diameter of Wire: 1.0mm

Application & Use

  • This wire may be manually or hydraulically swaged.
  • Cutting of the wire  is best done using Parrot Beak cutters (collapsing trapezoidal design) rather than shears or a grinder.
  • Terminal Loops are formed with Mechanical fastening or manual swaging. Terminal loops must use stainless steel thimbles  (eyelets) to retain the strength of the wire by distributing the load along  the entire length of wire in the terminal loop
  • Manual swaging is done using Ferrules (or crimps or hand swages) must be Nickel Coated Copper to avoid catastrophic swaging failure (aluminium swages WILL corrode the wire). A Manual All -in-1 swaging tools or pliers are recommended.
  • Hydraulic swaging is done using a hydraulic press which is either bench mounted or hand held. Therefore, hydraulic swaging for architectural purposes may  economically use a  Professional Hydraulic Swaging Tool. These tools generate pressure ‘spot’ welds. Low Cost Wire strongly recommends that hydraulic swaging for lifting and marine
    applications use a bench mounted hydraulic press which can generate pressure ‘seam’ welds.

Features & Benefits:

  • AISI 304 Marine Grade
  • Precision Manufactured
  • Rustproof
  • Packaging is as a reel or a coil. Wire lengths of less than 150M are coiled. While a reel can be provided for a small additional fee.
  • Finally, an AISI Mill certificate of alloy composition (copy) available on request for a small additional fee

Application & Use

  • This wire may be manually or hydraulically swaged.
  • Cutting of the wire is best done using Parrot Beak cutters (collapsing trapezoidal design) rather than shears or a grinder.
  • Terminal Loops are formed with Mechanical fastening or manual swaging. Terminal loops must use stainless steel thimbles (eyelets) to retain the strength of the wire by distributing the load along the entire length of wire in the terminal loop
  • Manual swaging is done using Ferrules (or crimps or hand swages) must be Nickel Coated Copper to avoid catastrophic swaging failure (aluminium swages WILL corrode the wire). A Manual All -in-1 swaging tools or pliers are recommended.
  • Hydraulic swaging is done using a hydraulic press which is either bench mounted or hand held. Therefore, hydraulic swaging for architectural purposes may economically use a Professional Hydraulic Swaging Tool. These tools generate pressure 'spot' welds. Low Cost Wire strongly recommends that hydraulic swaging for lifting and marine
    applications use a bench mounted hydraulic press which can generate pressure 'seam' welds.

Specifications

Wire Structure

7×19, 7×7, 1×19

Material

Stainless Steel

Grade

AISI G304 (Marine)

Coating

None

Save your Quote
Your Quote will be saved for 30 days and you'll be given a link. Anyone with the link, can use it to retrieve your Quote within that 30 days
Back Save your Quote
Your Shopping Cart will be saved as a Quote with Product pictures and information, and Cart Totals. You can then send it to yourself, or a friend, with a link to retrieve it at any time. Thanks for Looking! ...the LCW Team
Your cart email sent successfully :)