1300 601 514
1.5mm 7×7 Galvanised Steel Wire Rope

$0.47$362.68 Includes GST

Sale!
7x7 Galvanised Wire Reel
7X7 Galvanised Wire Detail
7X7 Galvanised Steel Wire Profile
7X7 Galvanised Steel Wire Structure
7x7 Galvanised Wire Rope Coil with Structure

1.5mm 7×7 Galvanised Steel Wire Rope

$0.47$362.68 Includes GST

Clear
SKU: 10494 Categories: , ,

This diameter of  Galvanised Steel Wire Rope is most often used in fencing or light rigging – such as blinds or windows with the 7×7 wire structures best suited for use in mechanically swaged fittings.
Please use the combinations of the offered lengths to get the total length you want. (e.g. – choose a quantity of “8” of the 10M length to select a single length of 80 Metres).
A separate ‘cut to length’ and ‘custom reeling’ service’ is can be requested for a small additional fee.

 

  • 1.5mm 7×7 Galvanised Steel Wire Rope is precision manufactured 2070 Marine Grade for enhanced durability in corrosive and hostile environments (marine or industrial). Terminal loops require completion with thimbles and ferrules (aluminium, copper, or nickel coated copper). Note: it is TOO THIN for bulldog clamps (wire rope grips).Tensile Strength (MBS = ~203.9kg
  • Application: uses include pulley hoists, shop fitting, as control cables or very light rigging.  It is commonly referred to as ‘working wire’ as Galvanised Wire Rope will not work harden in the same way that Stainless Steel wire will over time.
  • Length of Wire: Please use the combinations of the offered lengths to get the total length for which you search. E.G. – choose a quantity of “8” of the 10M length to select a single length of 80 Metres. All quantities of Wire Rope are cut and shipped as a single length unless otherwise discussed as a special order. Depending on total length, wire is packaged as a coil or a reel – both are factory wrapped and sealed. A requirement of less than 100M on a reel needs a special order (please phone first).
  • Quality: All Low Cost Wire products meet our strict ISO Quality Standards and are Mill Certified at manufacture. Long experience with wire and rope manufacturing enables the design and manufacture of wire rope with optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. The added bonus is that they provide a special treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

Usage Tips

  • First of all, this wire may be manually or hydraulically swaged.
  • Cutting of the wire is best done using Parrot Beak cutters (collapsing trapezoidal design) rather than shears or a grinder.
  • Terminal Loops are formed with  manual swaging. In addition, terminal loops must use thimbles (eyelets) to retain the strength of the wire by distributing the load along the entire length of wire in the terminal loop (available here). Recommended for only 7x7 and 7x19 structures
  • Manual swaging is done using Ferrules (or crimps or hand swages) rather than Wire Rope Grips. Nickel Coated Copper may be used instead of Aluminum with Galvanised Wire Rope. Neither Nickel Coated Copper or Aluminium swages cause a dissimilar alloys reaction and corrode the Galvanised Steel wire. Low Cost Wire strongly recommends an All-in-1 swaging tool. Recommended for only 7x7 and 7x19 structures
  • Hydraulic swaging is done using a hydraulic press either bench mounted or hand held. Hydraulic swaging for architectural purposes may economically use a Professional Hydraulic Swaging Tool while remaining work safe. These tools generate pressure 'spot' welds. Low Cost Wire strongly recommends that hydraulic swaging for lifting and marine applications use a bench mounted hydraulic press which can generate pressure 'seam' welds. Recommended for 1x19. (works with 7x7 and 7x19 structures).

Installation Considerations

  • Matching alloys is important and avoiding cross contamination is very important. Standard fittings for Galvanised Steel Wire are made from either Aluminium or Galvanised Steel (Stainless Steel and Copper Fittings will also work but they are generally more expensive).
  • It is recommended that similar alloy fasteners are used with the chosen fittings so that a dissimilar (corrosive) alloy reaction is avoided.
  • Lengths of wire less than 100M are cut and labelled as a coil. Lengths of 150M and above are (generally) delivered on a reel however, small lengths can be put on a drum for a small additional cost (please refer to our Reeling Service

Relevant FAQs

Specifications

Size - Length

1M, 10M, 50M, 100M, 500M, 1000M

Wire Diameter

1.5mm

Wire Structure

7×7

Material

Galvanised Steel

Grade

G2070 Galvanised (Marine)

Coating

None

Flexibility

Mid

Core

WSC

Connection Style

Hydraulic Swaging, Manual Swaging

MBS (Tensile Strength)

203.9 kg

Save your Quote
Your Quote will be saved for 30 days and you'll be given a link. Anyone with the link, can use it to retrieve your Quote within that 30 days
Back Save your Quote
Your Shopping Cart will be saved as a Quote with Product pictures and information, and Cart Totals. You can then send it to yourself, or a friend, with a link to retrieve it at any time. Thanks for Looking! ...the LCW Team
Your cart email sent successfully :)