1300 601 514
3.2mm 7×19 G2070 Galvanised Steel Wire Rope

$0.78$723.68 Inc GST

7x19 G2070 Galvanized Steel Rope
7x19 G2070 Galvanized Steel Rope Cross Section
7x19 Galvanized Steel Wire Rope Profile
7x19 Galvanised Steel Wire Structure Diagram
7x19 G2070 Galvanized Steel Wire Rope Coil with Structure and Size
7x19 G2070 Galvanized Steel Rope

3.2mm 7×19 G2070 Galvanised Steel Wire Rope

$0.78$723.68 Inc GST

SKU: 4119 Categories: , ,

3.2mm 7×19 G2070 Galvanised Steel Wire Rope is for rigging and lifting. This 3.2mm 7×19 G2070 Galvanised Steel Wire Rope (Marine Grade) has virtually no stretch coefficient and high range flexibility. The flexibility of the wire means it handles easily. As a result, it best either Manually or Hydraulically Swaged fittings. Both Professionals and DIY guys choose this wire for construction and rigging. All 3.0mm and 3.2mm fittings suit this wire. Tensile Strength (MBS) = ~713.8kg


Usage: This is a flexible wire making it easy to work with and bend with virtually no stretch coefficient. We recommend this wire with Thimble and Ferrule fittings as well as Hydraulically Swaged Fittings. Additional uses include: Picture (statue?) Hanging, Shop Fitting, Shade Sails, Trellis structuring, ‘Green Wall’ construction, Rigging Slings, Theatre Production Infrastructure – Stage Lights, Curtains, & Prop


Length of Wire: Use combinations of the offered lengths to get the desired total length. For example – choose a quantity of “8” of the 10M length to select a single length of 80 Metres. All Wire Rope orders are cut and shipped as a single length. As a result, each wire order is packaged as a coil or a reel depending on length and all are factory wrapped and sealed. A requirement of less than 100M on a reel needs a special order (please phone first).


Quality: All Low Cost Wire products meet our strict ISO Quality Standards. Likewise, our Stainless Steel Wire is AISI Mill Certified at manufacture. Consequently, an AISI Mill certificate of alloy composition (copy) is available for a small additional fee at the time of purchase. Our wire rope delivers the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Finally, our process provides a special treatment for a bright and smooth surface on the wire and cable. As a result, this delivers a truly top-shelf, long lasting product that will look new for ages…

Usage Tips

  • First of all, this wire may be mechanically - fastened or manually or hydraulically swaged.
  • Cutting of the wire is best done using Parrot Beak cutters (collapsing trapezoidal design) rather than shears or a grinder.
  • Terminal Loops are formed with Mechanical fastening or manual swaging. In addition, terminal loops must use thimbles (eyelets) (Stainless Steel or Galvanised) to retain the strength of the wire by distributing the load along the entire length of wire in the terminal loop (available here). Recommended for only 7x7 and 7x19 structures
  • Mechanical fastening is done with Wire Rope Grips (Bulldog Grips) Low Cost Wire does not recommend this approach. Industry practice is three per terminal loop for safety purposes. This only suits 7x7 and 7x19 structures.
  • Manual swaging is done using Ferrules (or crimps or hand swages) rather than Wire Rope Grips. Nickel Coated Copper may be used instead of Aluminum with Galvanised Wire Rope.  Neither Nickel Coated Copper or Aluminium swages cause a dissimilar alloys reaction and corrode the Galvanised Steel wire. Low Cost Wire strongly recommends an All-in-1 swaging tool. Recommended for only 7x7 and 7x19 structures
  • Hydraulic swaging is done using a hydraulic press either bench mounted or hand held. Hydraulic swaging for architectural purposes may economically use a Professional Hydraulic Swaging Tool while remaining work safe. These tools generate pressure 'spot' welds. Low Cost Wire strongly recommends that hydraulic swaging for lifting and marine applications use a bench mounted hydraulic press which can generate pressure 'seam' welds. Recommended for 1x19. (works with 7x7 and 7x19 structures).

Installation Considerations

  • Matching alloys is important and avoiding cross contamination is very important. Standard fittings for Galvanised Steel Wire are made from either Aluminium or Galvanised Steel (Stainless Steel and Copper Fittings will also work but they are generally more expensive).
  • It is recommended that similar alloy fasteners are used with the chosen fittings so that a dissimilar (corrosive) alloy reaction is avoided.
  • Lengths of wire less than 100M are cut and labelled as a coil. Lengths of 150M and above are (generally) delivered on a reel however, small lengths can be put on a drum for a small additional cost (please refer to our Reeling Service

Relevant FAQs



1M, 10M, 50M, 100M, 200M, 500M, 1000M

Wire Diameter


Wire Structure



Galvanised Steel


G2070 Galvanised (Marine)







Connection Style

Hydraulic Swaging, Manual Swaging, Mechanical/Swageless


RHOL (Right Hand Ordinary Lay)

MBS (Tensile Strength)

713.8 kg

Save your Quote
Your Quote will be saved for 30 days and you'll be given a link. Anyone with the link, can use it to retrieve your Quote within that 30 days
Back Save your Quote
Your Shopping Cart will be saved as a Quote with Product pictures and information, and Cart Totals. You can then send it to yourself, or a friend, with a link to retrieve it at any time. Thanks for Looking! ...the LCW Team
Your cart email sent successfully :)