1300 601 514
4.0mm Stainless Steel Wire Rope

$1.24$537.06 Includes GST

Sale!
Stainless Wire Reel LR
Wire Structures 7x7 7x19 1x19
7x19 Stainless Steel Wire Rope Profile
7x19 G316 Stainless Steel Wire Rope Coil with Structure and Size
7x19 G316 Stainless Steel Rope Cross Section
7x7 G316 Stainless Steel Wire Rope Coil with Structure
7X7 G316 Stainless Steel Wire Detail
1X19 G316 Stainless Steel Wire Profile Detail & Cross Section
1X19 G316 Stainless Steel Wire Profile

4.0mm Stainless Steel Wire Rope

$1.24$537.06 Includes GST

Clear
SKU: 11273 Categories: , ,

This diameter of Stainless Steel Wire Rope is used primarily used in Industrial Style Balustrade Construction and in (small) Yacht Rigging. Because this diameter has relatively low  flexibility, it handles easily. As a result, 4.0mm Stainless Steel Wire Rope has become the premium wire used in Wire Rope Balustrade Construction in Australia.

Wire lengths up to 150M are normally delivered in a coil however, all lengths can be put on a drum for a small additional cost (please refer to our Reeling Service).

4.0mm Stainless Steel Wire Rope

4.0mm Stainless Steel Wire Rope is used primarily used in Commercial Style Balustrade Construction and in (small) Yacht Rigging. It offers excellent strength and a prestige look to a balustrade project.

Because this diameter has relatively low  flexibility, it handles easily. As a result, 4.0mm Stainless Steel Wire Rope has become the premium wire used in Wire Rope Balustrade Construction in Australia.

Please use the combinations of the offered lengths to get the total length for which you search. E.G. – choose a quantity of “8” of the 10M length to select a single length of 80 Metres.

All quantities of Wire Rope are cut and shipped as a single length unless otherwise specifically ordered with a ‘cut to length’ service. (additional charge per length of wire to cut to a measurement, coil, label, and wrap separately – see our services section on this website). Lengths of wire less than 100M are cut and labelled as a coil. Lengths of 150M and above are (generally) delivered on a reel however, small lengths can be put on a drum for a small additional cost (please refer to our Reeling Service).

Our international supplier produces AISI Mill Certified wire rope. In addition, the certificate is available on request. Their long experience of wire and rope manufacturing enables them to design and manufacture wire and rope with optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. The added bonus is that they provide a special treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

Application:

  • First of all, this 4.0mm 7×19 G316 Stainless Steel Wire Rope may be mechanically  fastened  or manually or hydraulically swaged.
  • Cutting of the wire  is best done using Parrot Beak cutters (collapsing trapezoidal design) rather than shears or a grinder.
  • Terminal Loops are formed with Mechanical fastening or manual swaging. In addition, terminal loops must use stainless steel thimbles  (eyelets) to retain the strength of the wire by distributing the load along  the entire length of wire in the terminal loop (available here). Recommended for only 7×7 and 7×19 structures
  • Mechanical fastening is done with Wire Rope Grips (Bulldog Grips) Low Cost Wire does not  recommend this approach.  Industry practice is three per terminal loop for safety purposes. This only suits 7×7 and 7×19 structures.
  • Manual swaging is done using Ferrules (or crimps or hand swages) rather than Wire Rope Grips. Nickel Coated Copper is used instead of Aluminum because matching alloys is important.  Aluminium swages WILL cause a dissimilar alloys reaction and as a result corrode  the Stainless Steel wire and catastrophic swaging failure should be expected.  Low Cost Wire strongly recommends an All-in-1 swaging tool. Recommended for only 7×7 and 7×19 structures
  • Hydraulic swaging  is done using a hydraulic press either bench mounted or hand held. Hydraulic swaging for architectural purposes may economically use a  Professional  Hydraulic Swaging Tool while remaining work safe. These tools generate pressure ‘spot’ welds. Low Cost Wire strongly recommends that hydraulic swaging for lifting and marine applications use a bench mounted hydraulic press which can generate pressure ‘seam’ welds. Recommended for 1×19. (works with 7×7 and 7×19 structures).

Features & Benefits:

  • AISI 316 Marine Grade
  • Precision Manufactured
  • Factory Wrapped & Sealed
  • Cut Lengths -measured, bound, and sealed in plastic
  • Rustproof
  • Available as a coil or a reel. A requirement of less than 150M on a reel needs a special order (please phone first).
  • AISI Mill certificate of alloy composition is kept on file by batch number and is available at time of purchase on request for a small additional fee.

Specifications:

  • Quality: Marine AISI Grade: 316
  • Lay: Right Hand
  • Swaging Method: Hydraulic or Manual
  • Wire Structure: 7×19, 1×19, 7×7
  • Diameter of Wire: 4.0mm
  • First of all, this wire may be mechanically – fastened or manually or hydraulically swaged.
  • Cutting of the wire is best done using Parrot Beak cutters (collapsing trapezoidal design) rather than shears or a grinder.
  • Terminal Loops are formed with Mechanical fastening or manual swaging. In addition, terminal loops must use stainless steel thimbles (eyelets) to retain the strength of the wire by distributing the load along the entire length of wire in the terminal loop (available here). Recommended for only 7×7 and 7×19 structures
  • Mechanical fastening is done with Wire Rope Grips (Bulldog Grips) Low Cost Wire does not recommend this approach. Industry practice is three per terminal loop for safety purposes. This only suits 7×7 and 7×19 structures.
  • Manual swaging is done using Ferrules (or crimps or hand swages) rather than Wire Rope Grips. Nickel Coated Copper is used instead of Aluminum because matching alloys is important. Aluminium swages WILL cause a dissimilar alloys reaction and as a result corrode the Stainless Steel wire and catastrophic swaging failure should be expected. Low Cost Wire strongly recommends an All-in-1 swaging tool. Recommended for only 7×7 and 7×19 structures
  • Hydraulic swaging is done using a hydraulic press either bench mounted or hand held. Hydraulic swaging for architectural purposes may economically use a Professional Hydraulic Swaging Tool while remaining work safe. These tools generate pressure ‘spot’ welds. Low Cost Wire strongly recommends that hydraulic swaging for lifting and marine applications use a bench mounted hydraulic press which can generate pressure ‘seam’ welds. Recommended for 1×19. (works with 7×7 and 7×19 structures).
  • Quality: Marine AISI Grade: 316
  • Lay: Right Hand
  • Swaging Method: Hydraulic or Manual
  • Wire Structure: 7×7
  • Diameter of Wire: 4.0mm
  • Manufacturers Rated Capacity & Safe Working Load

Additional Information

Material

Stainless Steel

Grade

AISI G316 (Marine)

Wire Diameter

4.0mm

Wire Structure

7×19, 7×7, 1×19

Save your Quote
Your Quote will be saved for 30 days and you'll be given a link. Anyone with the link, can use it to retrieve your Quote within that 30 days
Back Save your Quote
Your Shopping Cart will be saved as a Quote with Product pictures and information, and Cart Totals. You can then send it to yourself, or a friend, with a link to retrieve it at any time. Thanks for Looking! ...the LCW Team
Your cart email sent successfully :)