4.8mm Swageless Bore Pump Kit G316 Stainless Steel
This Bore Pump Wire kit includes fittings suitable for a setting up a Bore Pump. The set up works with a 3 Wire Rope Grips installed on each end. A single Pack has enough fittings for a single Bore Pump Installation.
Description
This Bore Pump Wire 1366.4kg Grips Kit has a length of 7×19 G316 Wire Rope (50M or 100M) and includes 6 Wire Rope Grips for securing a bore pump. In a pack size of 1, there are enough fittings for a single pump:
- 1 – length of 7×19 G316 Stainless Steel Wire Rope
- 6 – G316 Stainless Steel Wire Rope Grips
- 2 – G316 Stainless Steel Thimbles
The Kit is offered in 5 versions – with differing MBS and wire length.
- 3.2mm 7×19 G316 Stainless Steel Wire Rope – MBS of 703.6 Kg
- 4.0mm 7×19 G316 Stainless Steel Wire Rope – MBS of 876.9 Kg
- 4.8mm 7×19 G316 Stainless Steel Wire Rope – MBS of 1,366.4 Kg
- 6.0mm 7×19 G316 Stainless Steel Wire Rope – MBS of 2,447.3 Kg
- 8.0mm 7×19 G316 Stainless Steel Wire Rope – MBS of 3,365.1 Kg
The fittings can be secured with a basic spanner and the Stainless steel wire rope can be trimmed to fit.
Installation of the assembly is simple. Cut the wire to length, secure the wire to the pump using 3 of the Wire Rope Grips. Secure the other end to the top of the well using the other 3 wire rope grips and ONLY then… feed the pump down the hole.
Usage: Secure the eye on the end of the cable that has been cut to size. An appropriate Cutter for this cable would be our 420mm Parrot Beak Cutter. Thimbles are recommended to reinforce the eyes and to distribute the load, but they are not provided in the kit.