Jaw Jaw Rigging Screw Grip Thimble Saddle Rivet SRMM
Jaw Jaw Rigging Screw Thimbles Grips Saddles SRMM kit suits a short run (SR – up to 10M). Additionally, the short run configuration uses a single jaw jaw rigging screw (one end). This provides a tensioning point.
Potentially Very Useful Related Items…
Description
Jaw Jaw Rigging Screw Thimbles Grips Saddles SRMM kit suits a short run (SR – up to 10M). Additionally, the short run configuration uses a single jaw jaw rigging screw (one end). This provides a tensioning point. There are also two Eye Straps (Saddles) that attach directly to end posts. Saddles secure with 316 Stainless Steel Truss Rivets. The kit components change based on the applicable wire rope.
Usage Before swaging, please expand tensioner for maximum adjust-ability. The Jaw Jaw Rigging Screw Thimbles Grips Saddles SR kit has a turnbuckle at one end. Saddles attach to the wire using a thimble and a two wire rope grips. As a result, this Kit may be installed in place with the wire “cut to fit”. Alternatively, you may build the wire before you install it. In this case, the length of a wire run is determined by the ‘inside to inside’ post measurement. We recommend planning first. Then cutting, building, installing and reviewing your installation ensures that it looks the way YOU want it to look once its complete.
Contents
- Jaw Jaw Rigging Screw Closed Turnbuckles Stainless Steel 316 Marine Grade (1included)
- Wire Rope Grips 316 Stainless Steel Marine Grade (4 included)
- Thimbles Stainless Steel 316 Marine Grade (2 included)
- Saddles (eye straps) Stainless Steel 316 Marine Grade (2 included)
- Truss Rivets Stainless Steel 316 Marine Grade (4 included)
Characteristics
- Balustrade Kit for 1 Runs/Wire
- Post Connections Metal to Metal (MM)
- Recommended Run Length up to 10M (SR)
- Swaging Method: Mechanical
- Wire Structure: 7×7, 7×19
- Diameter of Wire: 2.0mm, 2.4mm; 3.2mm; 4.0mm
- Section Orientation: Flat, Stairs, Angle
- Wire Orientation in a Section: Horizontal, Vertical