Nutsert 1/4-20 RHT Zinc Plated Steel Large Flange Splined

$0.41$221.00 Inc GST

Sale!

Nutsert 1/4-20 RHT Zinc Plated Steel Large Flange Splined

$0.41$221.00 Inc GST

Clear
SKU: 28357 Category:

Product Description

Nutsert 1/4-20 RHT Zinc Plated Steel Large Flange Splined place captive nut anchors in sheet, tube or hollow section. Nutserts are also called a Rivet Nut, Rivnut, Captive Nut, or Jack Nut. The Nutsert 1/4-20 RHT Zinc Plated Steel Large Flanged Splined is Round. Additionally, Nutserts are either open or closed. Large Flange Splined Nutserts are “OPEN”.  Open Nutserts are general purpose and form an open tube when installed. Conversely, closed rivnuts for a closed tube when installed. Additionally, rivnuts fit a single thread diameter and pitch. Other fittings such as a washer can used with Rivet Nuts. Rivet Nuts also require proper installation tools for their use.

* * * *

Usage: The Nutsert 1/4-20 RHT Zinc Plated Steel Large Flanged Splined provide a strong captive thread in thin panels.  Rivnuts are also recommended in applications where only one side of the panel is accessible. These include such as box or tube section. Rivet Nuts can be installed into panels as thin as 0.5mm.  Nutserts do not suffer from the maximum hardness limitations of self-clinching nuts.  Consequently, sheetnuts are suitable for installation into hard or non-ductile panels.  Our Rivnuts feature “bulge control” technology to accurately control the upset point. Additionally, the multi-grip feature is able to accommodate a much wider grip-range. Available in several materials, our high strength versions offer much improved thread strength.

* * * *

Quality: All Low Cost Wire products meet our strict ISO Quality Standards. Firstly, our products achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Secondly, that long experience with design and manufacturing enables the specification and production of aesthetically beautiful and functional products. Finally, our products have a special electro polished treatment for bright and smooth surface. Therefore our fasteners, fittings, wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

* * * *

Dimensions: D1= ~ 5.9mm D2 = ~ 4.0mm D3 = ~ 9.0mm H1 = ~ 11.0mm H2 = ~ 5.6mm W = ~ 0.9mm

Usage Tips

  • Nutserts (Rivet Nuts) are used to place a permanent fastener (nut) inside a closed structure (like a frame tube or a metal post) or behind a panel (like a body panel).
  • Large Flange Splined Rivet Nuts are the most forgiving and effective version of this incredible fastener.
  • Rivnuts allows fittings to be screwed into and tightened without needing a wrench behind the panel to hold a nut.
  • Recommend use of this type of fastening point when installing body kits to cars, rear wings, front spoilers / bumpers / scoops, or completing panel work.
  • Rivet Nuts are robust and light, they have long been used on aircraft and race cars / bikes.
  • Nutserts are compatible with fittings of the proper thread size and require a correctly sized mandrel and the appropriate Nutsert Tool for installation.
  • Our Nutsert Tool Mandrels fit our line of Rivet Nut Insertion Tools. They are industry fabrication quality and IMHO - one of the best hand tools around.
  • Mandrels are what are required to 'set' a nutsert into a panel. This Mandrel is recommended for use with our tools - click for details below

Installation Considerations

  • Matching alloys is important and avoiding cross contamination is very important.
  • It is recommended that similar alloy fasteners are used so that a dis similar (corrosive) alloy reaction is avoided where possible.
  • G304 Stainless Steel can be  used to attach fittings to all grades of stainless steel sheet or tube. G316 Nutserts are appropriate in HIGHLY corrosive environments,
  • G304 Stainless Steel is generally viewed as Superior to G316 in these applications because of its increased malleability in all normal environments - including marine.
  • Aluminium is used to attach to all grades of aluminium sheet or tube.. It should not be used as an 'economy' fastener on any grade of Stainless panel as corrosion will result and the connection will fail in a relatively short time.
  • Zinc coated Steel is used to attach to all grades of mild steel sheeting or tube.. It should not be used as an 'economy' fastener on any grade of Stainless panel as corrosion will result and the connection will ultimately fail.
  • Zinc coated steel may be used on aluminium panels however please beware of the difference in relative strength of the materials.
  • It may be necessary to (electrically) isolate and insulate fittings from the substrate material - again to avoid a galvanic (dissimilar alloys) reaction. Nylon  washers can be very effective in  this regard

Specifications

Pack Size

Single, 10 Pack, 100 Pack, 1000 Pack

Thread

1/4"-20

Material

Mild Steel

Grade

AISI G304 (Marine)

Handedness

RHT

Grip Range

0.5mm-3.5mm

Coating

Electro Plated Zinc

Dimensions

D1= ~ 5.9mm
D2 = ~ 4.0mm
D3 = ~ 9.0mm
H1 = ~ 11.0mm
H2 = ~ 5.6mm
W = ~ 0.9mm

You may also like…