1300 601 514
Nylon Split Ring Shallow Grommets – Black

$6.81$650.00 Inc GST

hallow Black Nylon Split Ring Grommet
Shallow Grey Grommet Sizing

Nylon Split Ring Shallow Grommets – Black

$6.81$650.00 Inc GST

SKU: 6649 Categories: , , , ,

Split Ring Nylon Grommets are used to either protect the stainless steel from interacting with any dis similar metal in the intermediates posts or provide a ‘finished’ look to timber or stainless steel intermediate posts. As well, Grommets are offered in a number of ‘depths’ and angles which are effective in different situations. Situations vary because of thick or thin walled tube, flat bar thickness, and any angular installation (stairs). All grommets are designed to fit and protect wire from 2.4mm up to  4.0mm (5/32″).

Nylon Split Ring Shallow Grommets are for flat runs where the intermediate posts are Bar (as opposed to hollow section). These are the fiddly bits that provide protection to stainless steel wire (or rope) when it passes through a structure (generally metal) on the wire cable.

Other Grommets are offered in an angle form and a shaollow form – each is effective in different situations because of thick or thin walled tube, flat bar thickness, and any angular installation (stairs).

Please note – these do NOT seal (watertight) to the wire.  They are designed as electrical insulators to keep dissimilar alloys apart – and thereby avoid a galvanic reaction .  This is the type of reaction that will occur between stainless steel and NON stainless metals (e.g. aluminium, and steel)


Mark out your hole and drill a VERY NEAT 10.0mm hole (use a new bit) as the retention shoulders are ~10.4mm  and they are needed to keep the grommet in place.Ifin doubt, add a touch of silcon sealant to secure the grommet.

Install them after all the wire is in place by simply spreading the grommet (split ring remember?) with a byro, slipping it over the wire and then pushing it into the hole. Too easy!

Features & Benefits:

  • UV Stable Nylon
  • Precision Manufactured
  • Rustproof
  • Split ring for insertion AFTER the wire is installed


  • 2.0mm  to o 4.0mm Stainless Steel Wire Rope
  • Flat Runs
  • NOTE: can also be used with smaller diameter wire ropes where additional. clearance  is require




Pack Size

10 Pack, 100 Pack, 1000 Pack




A = ~ 12.0mm
B = ~ 7.3mm
C = ~ 5.3mm
D = ~ 9.6mm
E = ~ 10.4mm

Wire Diameter

2.0mm, 2.4mm, 3.0mm, 3.2mm, 4.0mm, 4.8mm

Save your Quote
Your Quote will be saved for 30 days and you'll be given a link. Anyone with the link, can use it to retrieve your Quote within that 30 days
Back Save your Quote
Your Shopping Cart will be saved as a Quote with Product pictures and information, and Cart Totals. You can then send it to yourself, or a friend, with a link to retrieve it at any time. Thanks for Looking! ...the LCW Team
Your cart email sent successfully :)