Swage Bolt Hex Adjuster Lag Screw Eye SRTT

Description

This Swage Bolt Hex Adjuster Lag Screw Eye SRTT kit is suitable for latticework. Applications include horizontal Green Wall wires of up to 10 meters. Firstly, dual tensioning points with optional intermediate supports offer adequate adjustment. Secondly, there are enough fittings for a single wire run. Thirdly, intermediate Eye Lag Screws (6mmx75mm) support the wire and stick out from the wall the same distance as the 8mmx75mm Lag Eye Screws that support the end points. Versions of this Kit work with 2.4mm, 3.2mm, and 4.0mm Wire Rope.

Application
We recommend cutting, building, installing (a single wire first) and reviewing your installation to ensure that it looks the way YOU want it to look once its complete.

Option 1 – Build in Place First step, secure the eye bolts/screws. Subsequently, install the wire through the intermediate posts and ‘cut to length’. Secondly, drill the intermediate posts out to at least 4mm prior to swaging in place. Thirdly, before swaging, please expand all of the tensioners. Finally, this preserves the maximum adjust-ability.

Option 2 – Pre Build Alternately, you build the wire into the Swage Bolt Hex Adjuster Lag Screw Eye SRTT Kit before you install it. Consequently the wire length is the ‘inside to inside’ post measurement less a fixed amount. Interestingly, this fixed amount is the distance ‘taken up’ by the fittings. Finally, the kit installs and adjusts properly with the correct length adjustment.

Contents

• Hex Adjuster(Female) G316 Stainless Steel (2 included)
• Swage Bolt Terminal (Male) G316 Stainless Steel (2 included)
• 8mm x 75mm Lag Screw Eyes (2 included)

Characteristics

• Latticework Kit for 1 Runs/Wire
• Post Connections TT (Timber and Timber)
• Recommended Run Length: Up to 10M (SR)
• Swaging Method: Hydraulic
• Wire Structure: 7×7, 1×19
• Diameter of Wire: 2.4mm, 3.2mm, 4.0mm
• Section Orientation: Flat, Angle
• Wire Orientation in a Section: Horizontal, Vertical