Bolt Swage Rigging Screw Short Screw Eye Nutsert SRTM
This kit suits a run of wire of 10 meters or less(hence the SR or Short Run). There is a Bolt Swage Rigging Screw and a Terminal Swage Screw for attaching directly into metal and timber posts (hence the TM or Timber to Metal).
Description
Bolt Swage Rigging Screw Short Screw Eye Nutsert SRTM Kit suits a run of wire of up to 10 meters (hence the SR or Short Run). The Bolt Swage Rigging Screw provides a tensioning point at one end. Consequently, this makes one end adjustable. Ultimately, the threaded bolts secure both ends of the wire. There is 1 M6 Threaded Stud and a Bolt Swage Rigging Screw that form the two attachment points. These attach directly into metal posts equipped with Nutserts (hence the MM or Metal to Metal). Optional versions of this Kit work with 3.2mm and 4.0mm Wire Rope.
Application
We recommend cutting, building, installing (a single wire first) and reviewing your installation to ensure that it looks the way YOU want it to look once its complete.
Option 1 – Build in Place First step, secure the eye bolts/screws. Subsequently, install the wire through the intermediate posts and ‘cut to length’. Secondly, drill the intermediate posts out to at least 4mm prior to swaging in place. If the intermediate posts are metal – please drill to 8.0mm and use grommets. Thirdly, before swaging, please expand all of the tensioners. Finally, this preserves the maximum adjust-ability.
Option 2 – Pre Build Alternately, you build the wire into the Bolt Swage Rigging Screw Terminal Bolt NutsertSRMM Kit before you install it. Consequently the wire length is the ‘inside to inside’ post measurement less a fixed amount. Interestingly, this fixed amount is the distance ‘taken up’ by the fittings. Finally, the kit installs and adjusts properly with the correct length adjustment.
Contents
- Bolt Swage Rigging Screw M6 Stainless Steel 316 Marine Grade (1 included)
- RHT Swaged Lag Screw Stainless Steel 316 Marine Grade (1 included)
- M6 x 1.0 Nutsert Stainless Steel G304 Marine Grade (1 included)
Characteristics
- Balustrade Kit for 1 Runs/Wire
- Post Connections MM (Metal to Metal)
- Recommended Run Length <10M (SR)
- Swaging Method: Hydraulic
- Wire Structure: 7×7, 1×19
- Diameter of Wire: 3.2mm, 4.0mm
- Section Orientation: Flat
- Wire Orientation in a Section: Horizontal