Bolt Swage Rigging Screw Terminal Bolt SRMM
This kitsuits a run of wire of 10 meters or less(hence the SR orShortRun). There is a Bolt Swage Rigging Screw and a Terminal Swage Bolt for attaching directly into metal posts (hence the MM or Metal to Metal).
Description
Bolt Swage Rigging Screw Terminal Bolt SRMM Kit suits a run of wire of up to 10 meters (hence the SR or Short Run). The Bolt Swage Rigging Screw provides a tensioning point at one end. Consequently, this makes one end adjustable. Ultimately, the swage bolts secure both ends of the wire. Then the threads of the fitting can form the two attachment points. These attach directly into metal posts (hence the MM or Metal to Metal). Optional versions of this Kit work with 3.2mm and 4.0mm Wire Rope.
Application
We recommend cutting, building, installing (a single wire first) and reviewing your installation to ensure that it looks the way YOU want it to look once its complete.
Option 1 Build in PlaceFirst step, drill any intermediate posts out to at least 4mm prior to swaging in place. Secondly,install the wire through any intermediate posts and cut to length. Thirdly, before swaging, please expand all of the tensioners. Finally, this preserves the maximum adjust-ability.
Option 2 Pre BuildAlternately, you build the wire into the Bolt Swage Rigging Screw Terminal Bolt SRMM Kit before you install it. Consequently the wire length is the inside to inside post measurement less a fixed amount. Interestingly, this fixed amount is the distance taken up by the fittings. Finally, the kit installs and adjusts properly with the correct length adjustment.
Contents
Contents
- Bolt Swage Rigging Screw m6 Stainless Steel 316 Marine Grade (1 included)
- M6 X 1.0 X 40mm Terminal Swage Bolt Stainless Steel 316 Marine Grade (1 included)
Characteristics
- Balustrade Kit for 1 Runs/Wire
- Post Connections MM (Metal to Metal)
- Recommended Run Length <10M (SR)
- Swaging Method: Hydraulic
- Wire Structure: 7×7, 1×19
- Diameter of Wire: 3.2mm, 4.0mm
- Section Orientation: Flat, Stairs, Angle(note: stair or angle installations will require additional hardware such as bevel washers and or swivels – also available on our website)
- Wire Orientation in a Section: Horizontal