Countersunk Screws 8g x 41mm Stainless Steel TRADE PACKS

Description

Countersunk Screws 8g x 41mm Stainless Steel have a Phillips Drive and are Self Tapping in wood – however, a pilot hole is recommended. We offer various gauges and lengths for use in a wide variety of projects. Please note that Stainless Steel Screws are no more brittle than mild steel screws. It is important to keep them perpendicular to you work. Drive the counter sunk screws in with an electric screwdriver or drill with the clutch set as low as possible. This lessens the likelihood that the head may be popped off by impact with the bracket if the contact is not uniform

Usage: Countersunk Screws fasten into the posts or uprights directly. They also serve as the fastening points for anchors to run of balustrading wire into a post. Saddles, Pad Eyes (both oval and square and diamond shaped), and other locations points suiting a flat and solid surface are recommended. Choose a shorter Screw for attachment into thin wood – either pine or hardwood. There is more than enough bite and you avoid the possibility of torqueing off a longer screw into hard timber. Choosing a longer length is only appropriate in special circumstances.

Quality: All Low Cost Wire products meet our strict ISO Quality Standards. Firstly, our products achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Secondly, our long experience in the industry enables the design and manufacture of aesthetically beautiful and functional products. Finally, our products have a special treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

Dimensions: L = ~ 41.0mm L2 = ~ 14mm d = ~ 8g/4.2mm W = ~ 7.9mm