Eye Eye Turnbuckle Thimble Swage Saddle Tek SRMM

Description

Eye Eye Turnbuckle Swages Thimbles Swages Saddles Teks SRMM Kit Kit is configured to suit a single short run (SR – under 10M) of stainless steel wire rope. The short run configuration uses an Eye Eye Turnbuckles (at one end) to provide a single tensioning points. There are two Eye Straps (Saddles) that attach directly to end posts, secured with Tek Screws. The size of the fittings is matched to the chosen size of applicable Stainless Steel Wire Rope

Application

The Eye Eye Turnbuckle Swages & Saddles with Teks SRMM Kit has an eye eye turnbuckle at one end, attached to the wire using a thimble and a swage, which forms a terminal loop. The eye eye turnbuckle then attaches to a saddle, which in turn attaches to an end post.The other end of the run has another terminal loop, formed by another swage and thimble, but has no turnbuckle. Wire may be installed through the intermediate posts and ‘cut to length’. Drill the intermediate posts out to at least 4mm prior to swaging in place. Before swaging, please expand all of the tensioners so that the maximum adjust-ability is available.Alternately, if you build the wire before you install it, then the length of a wire run is determined by the ‘inside to inside’ post measurement, minus a fixed amount which represents the distance between the attachment posts ‘taken up’ by the fittings once installed and adjusted properly.This number represents the amount we would cut off in the factory to custom build wires with this kit for a given length. We recommend cutting, building, installing and reviewing your installation to ensure that it looks the way YOU want it to look once its complete.

Contents

• Eye Eye Open Turnbuckle Stainless Steel 316 Marine Grade (1 Included)
• Nickel Plated Copper Ferrules (swages / crimps) Marine Grade (2 Included)
• Thimbles Stainless Steel 316 Marine Grade (2 Included)
• Saddles (eye straps) Stainless Steel 316 Marine Grade (2 Included)
• Tek Screws Stainless Steel 304 Grade (4 Included)

Characteristics

• Balustrade Kit for 1 Runs/Wire
• Post Connections MM (Metal to Metal)
• Recommended Run Length <10M (SR)
• Swaging Method: Mechanical
• Wire Structure: 7×7, 7×19
• Diameter of Wire: 2.0mm, 2.4mm; 3.2mm; 4.0mm, 6.4mm
• Section Orientation: Flat, Stairs, Angle
• Wire Orientation in a Section: Horizontal, Vertical