Hook Eye Turnbuckle Thimble Grip Short Screw Eye LRTT
This kit suits manually swaging a run of wire of 10 meters or more (hence the LR or Long Run) as there two tensioning points. Attachments are two 6mm x 50mm (Short) Lag Eye Screws to attach directly into softwood or hardwood timber posts (hence the TT or Timber to Timber). Blue plugs are also available for Concrete or Brickwork attachment for a Green Wall of Espalier project.
Potentially Very Useful Related Items…
Description
Hook Eye Turnbuckle Thimble Swage Short Screw Eye LRTT Kit suits a run of wire of 10 meters or more(hence the LR or Long Run). There are two tensioning points and two attachment points. attachments are two 6mm x 50mm (Short) Lag Eye Screws. These attach directly into softwood or hardwood timber posts (hence the TT or Timber to Timber).
Application
The first end of the run has a 5mm Hook Eye Turnbuckle (for wire tensioning) swaged to the wire. The jaw of this attaches to the first 50mm Screw Eye. The other Jaw attaches to the wire using a terminal loop formed with a ferrule and to Wire Rope Grips. The Screw Eye is fastens to a timber post or wall. Repeat the procedure to fasten to the second post or wall.
Wire may be installed through the intermediate posts and ‘cut to length’. Please make sure you expand the turnbuckles before measurement and drill the intermediate posts out to at least 4mm prior to swaging in place. Alternately, if you build the wire before you install it, then the length of a wire run is determined by the ‘inside to inside’ post measurement less a fixed amount which represents the distance between the attachment posts ‘taken up’ by the fittings when installed and adjusted properly.
This kit may also be used for ‘infill’ balustrading with the addition of extra Short Lag Screw Eyes.
Contents
- 6mm X 50mm Lag Eye Screw Stainless Steel 316 Marine Grade (2 included)
- 5mm Hook Eye Turnbuckle G316 Stainless Steel Marine Grade (2 included)
- Wire Rope Grips G316 Stainless Steel (size depends on chosen wire diameter) (4 included)
- Thimbles G316 Stainless Steel (size depends on chosen wire diameter) (2 included)
Characteristics
- Balustrade Kit for 1 Runs/Wire
- Post Connections TT (Timber to Timber), TC (Timber to Concrete), CC (Concrete to Concrete)
- Recommended Run Length <20M (LR)
- Swaging Method: Manual
- Wire Structure: 7×7, 7×19
- Diameter of Wire: 2.0mm, 2.4mm, 3.2mm, 4.0mm
- Section Orientation: Flat, Stairs, Angle, Infill
- Wire Orientation in a Section: Horizontal, Vertical, Angled