Hook Hook Turnbuckle Pad Eye Spring Hook 3CTT

Description

Hook Hook Turnbuckle Pad Eye Spring Hook 3CTT Kit suits a square Shade Sail of (hence the 3C or Three Corner=Triangular) mounted to a timber structure. There are two tensioning points and three attachment points. Attachments are three square Pad Eyes. These attach directly into Timber posts (hence the TT or Timber to Timber).

Application: All three Pad Eyes are attached to the mounting surfaces. It is recommended that the attachment points are NOT all on the same plane. Same plane installations make it extremely hard to achieve adequate and effective tension in the sail.

First, use the snap hook to locate one of the corners to one of the Pad Eyes. Then use the Hook Hook Turnbuckles (for sail tensioning) on the two remaining corners of the sail. This allows the sail to be ‘stretched’ in two directions when attached to the appropriate Pad Eyes. The result should be a strong line of tension at least across the edges of the sail.

If the tension is seen as inadequate, stainless steel wire may be placed under the Sail, ‘cut to length’, and installed separately to provide additional rigidity. Please make sure you expand the turnbuckles before measurement and drill the attachment Posts posts with pilot holes adequate for the screws in the Pad Eyes

Contents

• Square Pad Eyes Stainless Steel 316 Marine Grade(3 included)
• Lag Thread Mounting Screws G316 Stainless Steel Marine Grade(12 included)
• Hook Eye Turnbuckles G316 Stainless Steel Marine Grade(2 included)
• Spring Hook G316 Stainless Steel Marine Grade(1 included)

Characteristics

• Shade Sail Kit for: 1 Shade Sail
• Post Connections: TT (Timber to Timber)
• Sail Configuration: Triangular (3C)
• Security Rating: Med
• Dis-assembly Ease: Med
• Diameter of Fittings: 6.0mm, 8.0mm, 10.0mm
• Sail Orientation: Flat, Vertical, Angle