Jaw Jaw Rigging Screw Thimble Swage SR
Jaw Jaw Rigging Screw Thimble Swage SR kit suits a run of wire of 10 meters or less (hence the SR or Short Run). There a single tensioning point and two attachment points.
Potentially Very Useful Related Items…
Description
Jaw Jaw Rigging Screw Thimble Swage SR kit suits a run of wire of 10 meters or less (hence the SR or Short Run). There a single tensioning point and two attachment points.
Application
The first end of the run has a 5mm Jaw / Jaw Rigging Screw (for wire tensioning) swaged to the wire. The jaw of this attaches to the first point. The other Jaw attaches to the wire using a terminal loop formed with a ferrule and a swage. The second end uses a terminal loop formed with a ferrule and a swage to attach to the second Eye Bolt which is fastened to the second post or wall. Wire may be installed through the intermediate posts and ‘cut to length’. Please make sure you expand the turnbuckles before measurement and drill the intermediate posts out to at least 4mm prior to swaging in place. Alternately, if you build the wire before you install it, then the length of a wire run is determined by the ‘inside to inside’ post measurement less a fixed amount which represents the distance between the attachment posts ‘taken up’ by the fittings when installed and adjusted properly.This Kit does NOT have fasteners
Contents
- 5mm Jaw/ Jaw Rigging Screw G316 Stainless Steel Marine Grade (1 Included)
- Nickel Coated Copper Ferrules (2 Included)
- G316 Stainless Steel Thimbles (2 Included)
Characteristics
- Balustrade Kit for 1 Runs/Wire
- Post Connections MM (Metal to Metal)
- Recommended Run Length <10M (SR)
- Swaging Method: Manual
- Wire Structure: 7×7, 7×19
- Diameter of Wire: 1.6mm, 2.0mm, 2.4mm, 3.2mm 4.0mm
- Section Orientation: Flat, Stairs, Angle
- Wire Orientation in a Section: Horizontal, Vertical