Jaw Swage Rigging Screw Collared Eye Bolt LRMM

Description

Jaw Swage Rigging Screw Collared Eye Bolt LRMM Kit suits a run of wire of up to 20 meters (hence the LR or Long Run). The Jaw Swage Rigging Screw provides a tensioning point at both ends. Consequently, this makes both ends adjustable. Ultimately, the eye bolts secure both ends of the wire. There are two 2 Collared Eye Bolts that form the two attachment points. These attach directly into a metal post(hence the MM or Metal to Metal). Optional versions of this Kit work with 4.0mm, 4.8mm, 5.0mm, 6.0mm, and 6.4mm Wire Rope.

Application
We recommend cutting, building, installing (a single wire first) and reviewing your installation to ensure that it looks the way YOU want it to look once its complete.

Option 1 – Build in Place First step, secure the eye bolts. Subsequently, install the wire through the intermediate posts and ‘cut to length’. Secondly, drill the intermediate posts out to at least 8mm prior to swaging in place. Recommended use of grommets require 8mm holes. Thirdly, before swaging, please expand all of the tensioners. Finally, this preserves the maximum adjust-ability.

Option 2 – Pre Build Alternately, you build the wire into the Jaw Swage Rigging Screw Collared Eye Bolt LRMM Kit before you install it. Consequently the wire length is the ‘inside to inside’ post measurement less a fixed amount. Interestingly, this fixed amount is the distance ‘taken up’ by the fittings. Finally, the kit installs and adjusts properly with the correct length adjustment.

Contents

• Jaw Swage Rigging Screw Stainless Steel 316 Marine Grade (2 included)
• JIS Collared Eye Bolt Stainless Steel 316 Marine Grade (2 included)

Characteristics

• Balustrade Kit for 1 Runs/Wire
• Post Connections MM (Any Material)
• Recommended Run Length: Up to 20M (LR)
• Swaging Method: Hydraulic
• Wire Structure: 7×7, 1×19
• Diameter of Wire: 4.0mm, 4.8mm, 5.0mm, 6.0mm, and 6.4mm
• Section Orientation: Flat, Stairs, Angle
• Wire Orientation in a Section: Horizontal