Jaw Swage Rigging Screw Fork Terminal Pad Eye SR

Description

Jaw Swage Rigging Screw Fork Terminal Pad Eyes SR Kit suits a run of wire of 10 meters or less (hence the SR or Short Run). The Jaw Swage Rigging Screw provides a single tensioning point at one end. And the other end has a non-adjustable Fork Terminal. Consequently, the Pad Eyes secure both ends of the wire. No fasteners are supplied with this kit. As a result, the Pad Eyes can attach directly into a softwood, hardwood, or metal posts or walls etc. Optional versions of this Kit work with 2.4mm, 3.2mm, and 4.0mm Wire Rope.

Application
We recommend cutting, building, installing and reviewing your installation to ensure that it looks the way YOU want it to look once its complete.

Option 1 – Build in Place First step, secure the Pad Eyes. Subsequently, install the wire through the intermediate posts and ‘cut to length’. Secondly, drill the intermediate posts out to at least 4mm prior to swaging in place. Thirdly, before swaging, please expand all of the tensioners. Finally, this preserves the maximum adjust-ability.

Option 2 – Pre Build Alternately, you build the wire into the Jaw Swage Rigging Screw Fork Terminal Pad Eyes SR Kit before you install it. Consequently the wire length is the ‘inside to inside’ post measurement less a fixed amount. Interestingly, this fixed amount is the distance ‘taken up’ by the fittings. Finally, the kit installs and adjusts properly with the correct length adjustment.

Contents

• Jaw Swage Rigging Screw Stainless Steel 316 Marine Grade (1 included)
• Fork Terminal Stainless Steel 316 Marine Grade (1 included)
• Pad Eyes (rectangular eye pads) Stainless Steel 316 Marine Grade (2 included)

Characteristics

• Balustrade Kit for 1 Runs/Wire
• Post Connections (Any Material)
• Recommended Run Length: 10M (SR)
• Swaging Method: Hydraulic
• Wire Structure: 7×7, 1×19
• Diameter of Wire: 2.4mm, 3.2mm, 4.0mm
• Section Orientation: Flat, Stairs, Angle
• Wire Orientation in a Section: Horizontal, Vertical