Jaw Swage Rigging Screw Long Eye Bolt Timber Insert LRTT
Click Here for Short Run Version of this Kit SRTT
Potentially Very Useful Related Items…
Description
Jaw Swage Rigging Screw Long Eye Bolt Nutsert LRTT
Jaw Swage Rigging Screw Long Eye Bolt Nutsert LRTT Kit suits a run of wire of 10 meters or more (hence the LR or Long Run). There are two tensioning points and two attachment points. attachments are two M6 x 1.0 x 40mm (Long) Mini Eye Bolts. These attach directly into the two RHT Timber Inserts once they are installed into the metal posts (hence the TT or Timber to Timber).
Application
Drill the posts and install the Timber Inserts using a Hex Wrench. The first end of the run has a Jaw / Swage Rigging Screw (for wire tensioning) swaged to the wire. This attaches to the first 40mm Eye Bolt. The Mini Eye Bolt fastens to the Timber Insert. The second end uses another Jaw / Swage Rigging Screw (for wire tensioning) swaged to the wire to attach to the second 40mm Mini Eye Bolt which is fastened to the second Timber Insert. We recommend that the end posts are drilled 8.0mm to accommodate the M6x1.0 Stainless Steel Timber Inserts.
Wire may be installed through the intermediate posts and ‘cut to length’. Please make sure you expand the turnbuckles before measurement and drill the intermediate posts out to at least 4mm prior to swaging in place. If you want your intermediate posts to match with awesome Stainless Steel ‘grommets’ – you will want to rebate 1.5cm in depth and 8.0mm in diameter to Stainless Steel or Nylon split ring standard grommets.
Alternately, if you build the wire before you install it, then the length of a wire run is determined by the ‘inside to inside’ post measurement less a fixed amount which represents the distance between the attachment posts ‘taken up’ by the fittings when installed and adjusted properly.
Contents
- 2 – M6 x 1.0 x 40mm Mini Eye Bolt Stainless Steel 316 Marine Grade
- 2- Jaw/Swage Rigging Screw G316 Stainless Steel Marine Grade
- 2 – M6 RHT Timber Inserts G316 Stainless Steel Marine Grade
Characteristics
- Balustrade Kit for 1 Runs/Wire
- Post Connections TT (Timber to Timber)
- Recommended Run Length >10M (LR)
- Swaging Method: Hydraulic
- Wire Structure: 7×7, 1×19
- Diameter of Wire: 2.4mm, 3.2mm, 4.0mm
- Section Orientation: Flat, Stairs, Angle
- Wire Orientation in a Section: Horizontal, Vertical