Swage Bolt Hex Adjuster Dome End Stopper SRMM
Swage Bolt Hex Adjuster Dome End Stopper SRMM Kit suits a short run of wire of 10 meters or less (SR = Short Run). Firstly, fittings suit a run of wire up to 10 meters in length. Secondly, there is one tensioning point. Finally, there are enough fittings for a single wire run.
Potentially Very Useful Related Items…
Description
Swage Bolt Hex Adjuster Dome End Stopper SRMM Kit suits a short run of wire of 10 meters or less (SR = Short Run). Firstly, fittings suit a run of wire up to 10 meters in length. Secondly, there is one tensioning point. Finally, there are enough fittings for a single wire run.
Usage: Installation of the Swage Bolt Hex Adjuster Dome End Stopper SRMM is easy. In this application one end uses an M6 Hex Adjuster with an M6 Swage Thread Terminal to create the required tension. Conversely, the other end uses a swage end stopper (sometimes called a rod end, or end stop) to prevent twisting the wire. Finally, the fittings require hydraulic swaging. Firstly, cut the wire to length. Secondly, swage the dome end. Thirdly, feed the wire through pre-drilled intermediate posts. Finally, swage the thread terminal on, screw on the hex adjuster – and using a hex key – apply tension.
Contents
- RHT Swage Bolt M6 Stainless Steel 316 Marine Grade (1 included)
- Hex Adjuster M6 Stainless Steel 316 Marine Grade (1 included)
- Dome End Swage Stopper Stainless Steel 316 Marine Grade (1 included)
Characteristics
- Balustrade Kit for 1 Runs/Wire
- Post Connections MM (Metal to Metal)
- Recommended Run Length <10M (SR)
- Swaging Method: Hydraulic
- Wire Structure: 7×7, 1×19
- Diameter of Wire: 2.4mm, 3.2mm, 4.0mm
- Section Orientation: Flat, Stairs, Angle
- Wire Orientation in a Section: Horizontal, Vertical