Swage Bolt Mini Hex Adjuster SRMM BlackTech

Description

This Swage Bolt Mini Hex Adjuster SRMMBlackTech kit includes fittings suitable for a Run of wire between two metal posts, both are are a female Hex Adjuster with a Terminal Swage Bolt. These attach directly through your Metal Posts (hence the MM or Metal to Metal).. There are enough fittings for a single wire run but they are BLACK.

Application:In this application, both ends are threaded through holes drilled in the end posts. One end of the run uses an M6 Hex adjuster with an M6 Swage Thread Terminal (for wire tensioning). The other end uses the same set up. The fittings must be either hydraulically swaged or manually swaged (we recommend our Heavy Duty Hydraulic Swager).

To attach the finished wire to your balustrade, simply cut the wire to length, swage on one M6 Swage Bolt Terminal and screw on a Hex Adjuster. Then thread the wire through the end post and feed the wire through any intervening posts (that have been pre-drilled with 8mm holes note we recommend Grommets for the intervening posts), swage the fitting to the end of the wire and insert into the end post, screw on the Hex Adjuster, insert a hex key and twist to apply tension.

Contents:

• M6 Female Hex Adjuster G316 Stainless Steel (2 included)
• RHT G316 Stainless Steel Terminal Lag Bolts(2 included)

Specifications:

• Balustrade Kit for 1 Run of Wire
• Post Connections MM (Metal to Metal
• Recommended Run Length <10M (SR)
• Swaging Method: Hydraulic
• Suitable Wire Structure: 1×19
• Suitable Diameter of Wire: 3.2mm
• Suitable Section Orientation: Flat, Stairs, (Angle needs BEVEL Washers but you can do it)
• Suits Wire Orientation in a Section: Horizontal, Vertical