Swage Swage Rigging Screws M5 3.2mm G316 Stainless Steel TRADE PACKS

Description

Swage Swage Rigging Screws M5 – 3.2mm are ideal fasteners for projects joining stainless steel wire rope. These fasteners put a turnbuckle in the middle of a run. Consequently, they splice and tighten an existing run. They therefore provide a professional and timeless look. Especially relevant are the both right-hand and left-hand threads. Firstly, these allow the body of the rigging screw to easily provide tension to your wire rope, without bending or stretching the wire. Tighten the body of the rigging screw with a c-spanner by rotating the body clockwise until tensioned to your needs.

Usage: The Swage Swage Rigging Screws M5 – 3.2mm will work with few other fittings. They fasten directly to the wire, not an anchor hole. An anchor holes form the frame or area that will contain the wire. A hydraulic swager crimps the stud to the appropriate diameter of wire rope. With both right-hand and left-hand threads, the body of the Swage Swage Rigging Screw M5 – 3.2mm can easily provide tension to your wire rope, without bending or stretching the wire. Tighten the body of the rigging screw with a c-spanner by rotating the body clockwise until tensioned to your needs.

Quality: All Low Cost Wire products meet our strict ISO Quality Standards. Firstly, our products achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Secondly, that long experience with wire rope manufacturing enables the design and manufacture of aesthetically beautiful and functional products. Finally, our products have a special treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

Dimensions: D = ~ 6.0mm d = ~ 6.0mm L = ~ xxx.0mm L1 = ~ xxx.0mm A = ~ 8.0MM