Welded Eye Screw 8mm x 80mm G316 Stainless Steel TRADE PACKS

Description

Welded Eye Screw 8mm x 80mm (or Lag Screw Eyes) are fastening points that anchor a run of wire into a post. Choose a shorter Lag Eye Screw for attachment into either pine or hardwood. There is more than enough bite. And you avoid the possibility of torquing off a longer screw into hard timber. Choosing a longer length of Welded Lag Eye Screws is only appropriate if you want the ‘eye’ to protrude (visibly) from your attachment post. The eye on the Welded Eye Screw 8mm x 80mmis much larger than the Mini Eye Screws and is specifically formed to both work with either a manually or a hydraulically swaged jaw end on the wire run – and to replicate the look of a Welded Eye Bolt (for metal)

Usage: Longer Lag Eye Screws work best in situations where you need to go into concrete or go through render or siding to hit an anchoring stud. You may need the extra length/bite for use with a standard Plastic Plug. To make the job easier, try using a proper sized Fork Terminal in your drill as a driving tool. Simply put, IT ROCKS – saves your wrists, speeds up the install and demonstrates a bit of ingenuity. As well, Thimbles, screws, bolts, and saddles are all available from our on-line Store.

Quality: All Low Cost Wire products meet our strict ISO Quality Standards. Firstly, our products achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Secondly, our long experience in the industry enables the design and manufacture of aesthetically beautiful and functional products. Finally, our products have a special treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

Dimensions: D = ~ 9.2mm D1 = ~ 30.5mm L = ~ 80.0mm H = ~ 7.5mm A = ~ 15.9mm