Well Nut M4 Rubber Coated Brass TRADE PACKS

Description

Well Nut M4 Rubber Coated Brass Std Flange suit non-load bearing applications. They act to place captive nut anchors in sheet, tube or hollow section. Well Nuts (or Rub Nuts or Rubber Nutserts) are a lightweight, vibration resistant, range of metal insert that is similar to Rivet Nuts. Well nuts are rubber body threaded inserts that consist of a large flange neoprene bushing with a captive brass nut embedded on the inside, ideal when seeking to isolate vibration or in lightweight non-load bearing applications or when seeking a removable nut. They are easy to install and no special tools are required.

Usage: Well Nut M4 Rubber Coated Brass Std Flange provide a captive nut in non-load bearing applications. Easy to install, no special tools required, just follow these simple steps. (1) place the well nut in a pre-drilled hole with the flange part on top of the mounted material and the straight body on the blind side. (2) As you tighten the component the body of the well nut compresses and bulges 360 degrees. (3) the well nut has now created a lip on the blind side of the material and firmly interlocked itself onto the material.

Quality: All Low Cost Wire products meet our strict ISO Quality Standards. Firstly, our products achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Secondly, our long experience in the industry enables the design and manufacture of aesthetically beautiful and functional products. Finally, our products have a special treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

Dimensions: A= ~ 7.9mm B = ~ 12.6mm C = ~ 1.4mm D = ~ 11.0mm T= M4