Swage Sleeve 1.0mm Oval Aluminium

Description

Swage Sleeve – 1.0mm Oval Aluminium connects 1.0mm Galvanised Steel Wire Rope. A Swage Sleeve is a crimp, clamp, ferrule, or tube. The Swage Sleeve 2.0mm Oval Aluminium is both DIN 3093 and EN13411-3 compliant. Additionally, Oval Swages are machine swages. Hourglass Swages are manual swages. Machine Swages require hydraulic swaging in diameters of 2.0mm or greater. Additionally, a Swage Sleeve fits a single wire diameter. Other fittings – normally of a thimble – are used in concert with Swage Sleeves. Swage Stoppers do NOT require thimbles for their use.

Usage: The Swage Sleeve – 1.0mm anchors together 2 strands of wire. These aluminium DIN ferrules are all compatible with G2070 Galvanised Steel Wire Rope. Ultimately, the increased alloy malleability allows for easy swaging. To clarify, swaging is uniformly crushing a fitting from a starting diameter to a finished diameter. Therefore, the chosen swaging tool must achieve a cold pressure weld. Logically, the requisite pressure and tool size varies with the size of the wire and the fitting. Consequently, we recommend Swaging DIN 3093 fittings onto wire with an adequate hydraulic swaging tool.

Quality: All Low Cost Wire products meet our strict ISO Quality Standards. Firstly, our products achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Secondly, our long experience in the industry enables the design and manufacture of aesthetically beautiful and functional products. Finally, our products have a special treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

Dimensions: a = ~ 1.4mm b = ~ 2.2mm s = ~ 0.6mm L = ~ 5.0mm