Sale!

Black Nylon Shallow Split Ring Grommets

Split Ring Nylon Grommets are used to either protect the stainless steel from interacting with any dis similar metal in the intermediates posts or provide a ‘finished’ look to timber or stainless steel intermediate posts. As well, Grommets are offered in a number of ‘depths’ and angles which are effective in different situations. Situations vary because of thick or thin walled tube, flat bar thickness, and any angular installation (stairs). All grommets are designed to fit and protect wire from 2.4mm up to  4.0mm (5/32″).

SKU: 6649 Category:

Description

Black Nylon Shallow Split Ring Grommets protect stainless steel wire from non-stainless metals. Shallow Split Ring Grommets suit flat runs where the intermediate posts are Bar (as opposed to hollow section). These are the fiddly bits that provide protection to stainless steel wire (or rope) when it passes through a structure (generally metal) on the wire cable. Other Grommets are offered in an angle form and a shallow form – each is effective in different situations because of thick or thin walled tube, flat bar thickness, and any angular installation (stairs). Please note – these Black Nylon Shallow Split Ring Grommets do NOT seal (watertight) to the wire.  These grommets are electrical insulators to keep dissimilar alloys apart – and thereby avoid a galvanic reaction .  This is the type of reaction that will occur between stainless steel and NON stainless metals (e.g. aluminium, and steel)

Usage: Mark out and drill a VERY NEAT 10.0mm hole (use a new bit). The retention shoulders are ~10.4mm  and require a precise hole to keep the grommet in place. If in doubt, add a touch of silicon sealant to secure the grommet. Install them after all the wire is in place by simply spreading the grommet (split ring remember?) with a “byro”, slipping it over the wire and then pushing it into the hole. Too easy! Grommets are made of precision manufactured, rustproof, UV Stable Nylon

Quality: All Low Cost Wire products meet our strict ISO Quality Standards. Firstly, our products achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Secondly, that long experience with wire rope manufacturing enables the design and manufacture of aesthetically beautiful and functional products. Finally, our products have a special surface treatment. This bright and smooth surface delivers a truly top-shelf, long lasting product that will look new for ages…

Dimensions: A = ~ 12.0mm, B = ~ 7.3mm, C = ~ 5.3mm, D = ~ 9.6mm, E = ~ 10.4mm, F= ~3.6mm, G= ~ 1.7mm