Net Clip 90 Degree Wire Offset

$5.78$8.78 Inc GST

Sale!

Net Clip 90 Degree Wire Offset

$5.78$8.78 Inc GST

A Cross Wire Clamp is a solid piece of G316 Stainless Steel that has an X milled out of the back of the fitting allowing two wires (positioned at 90 degrees to each other) to be secured with a grub screw.

Clear

Product Description

Net Clip 90 Degree Wire Offset (X-Joiner or Cross Wire Clamp)

A Net Clip 90 Degree Wire Offset or Cross Wire Clamp is a solid piece of G316 Stainless Steel that has an X milled out of the back of the fitting allowing two wires (positioned at 90 degrees to each other) to be secured with a grub screw. These are also known as ‘Net Clips’.

Cross Wire Clamps are perfect for stainless steel wire trellis installations that require horizontal and vertical cables positioning at angles of 90 degrees.

Installation Advice
Simply remove the central M12 hex head grub screw. insert your wires and position.
To secure wires, replace the central grub screw and tighten.

Application

Cross Clamps are designed to keep all wires in the correct cross pattern on the garden wall. If the grid spacing is large or the run is long in one dimension, additional support is achieved by using the cross clamp with wall attachment or selective wire crossovers.

The Net Clip 90 Degrees will work with various diameters of wires including 2.4mm, 3.0mm, 3.2mm, and 4.0mm

The Grub Screw in the fitting is an M12 Thread.

 

Specifications

Grade

AISI G316 (Marine)

Material

Stainless Steel

Wire Diameter

2.4mm, 3.0mm, 3.2mm, 4.0mm, 4.8mm, 5.0mm