Bolt Swage Rigging Screw Timber Insert LRTT

Description

Bolt Swage Rigging Screw Timber Insert LRTT Kit suits a run of wire of 20 meters or less (hence the LR or Long Run). Fittings include two Bolt Swage Rigging Screws that form two attachment points in combination with Timber Inserts (both RHT). Together, these inserts attach directly into Timber posts (hence the TT or Timber to Timber).

Application: The first end of the Bolt Swage Rigging Screw Timber Insert LRTT Kit has a Bolt Swage Rigging Screw swaged to the wire and this attaches to the first timber post or wall using a RHT Timber Insert. As well, the second end uses the other Bolt Swage Rigging Screw which is fastened to the second post or wall with the second RHT Timber Insert. Drill the intermediate posts out to at least 4mm prior to swaging in place.

Contents

• M6 Bolt Swage Rigging Screw Stainless Steel 316 Marine Grade (2 included)
• M6 x 1.0 RHT Timber Insert Stainless Steel 304 Marine Grade (2 included)

Characteristics

• Balustrade Kit for Pack Size Runs/Wire
• Post Connections TT (Timber to Timber)
• Recommended Run Length <20M (LR)
• Swaging Method: Hydraulic
• Wire Structure: 7×7, 1×19
• Diameter of Wire: 3.2mm, 4.0mm
• Thread of Fitting: M6 x 1.0
• Section Orientation: Flat, Stairs, Angle (however, you must use additional swivels)
• Wire Orientation in a Section: Horizontal