Tek Screw 8G 4.2mm x 32mm G304 Stainless Steel TRADE PACKS

Description

Tek Screw 8G 4.2mm x 32mmHex Flange Head are exceptional Marine Grade fasteners with a standard Hex Head and are Self Tapping – in this case self drilling. However we recommend a pilot hole. Various gauges / diameters and lengths are available. Marine Grade Stainless Steel Screws are more brittle than mild steel screws. Install screws with the drive clutch set as low as possible. Maximum RPM recommended is 2500 (medium). This lessens the likelihood that the head may be popped off by impact with the bracket if the contact is not uniform

Usage: Tek Screw 8G 4.2mm x 32mm combine with Nylon (isolation) and stainless Washers for security. The screw fastens into the posts or uprights directly and anchor to runs of balustrading wire into a post. U Clips, Saddles, Pad Eyes (both oval and square and diamond shaped), and other locations points suiting a flat and either thin or hollow surface are recommended. Choose a shorter Screw for attachment into thin material – either wood or metal. There is more than enough bite and you avoid the possibility of torqueing off a longer screw into hard timber. Choosing a longer length is only appropriate in special circumstances.

Quality: All Low Cost Wire products meet our strict ISO Quality Standards. Firstly, our products achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Secondly, our long experience in the industry enables the design and manufacture of aesthetically beautiful and functional products. Finally, our products have a special treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

Dimensions: D = 8G W = ~4.2mm L = ~32.0mm