Nutsert M12 Zinc Plated Steel Large Flange Splined TRADE PACKS

Description

Nutsert M12 Zinc Plated Steel Nutserts Large Flange Splined place captive nut anchors in sheet, tube or hollow section. Nutserts are also Rivet Nuts, Rivnuts, or Captive Nuts. The Zinc Plated Steel Nutserts are Round. Additionally, Nutserts are either open or closed. Our Large Flange Splined Nutserts are “OPEN”. These fittings form an open tube when installed. Conversely, closed Rivnuts form a closed tube when installed. Additionally, Rivnuts fit a single thread diameter and pitch. Other fittings can used with Rivet Nuts. Rivet Nuts also require proper installation tools for their use.

Usage: The Nutsert M12 Zinc Plated Steel Nutserts provide a strong captive thread in thin panels. Use is recommended in applications where only one side of the panel is accessible. These include such as box or tube section. Rivet Nuts install based on grip range Nutserts avoid the maximum hardness limitations of self-clinching nuts. Consequently, rivet nuts are suitable for installation into hard or non-ductile panels. Our Rivnuts feature “bulge control” technology. This accurately controls the upset point. Additionally, the multi-grip feature accommodates a much wider grip-range. Our high strength versions offer much improved thread strength.

Quality: All Low Cost Wire products meet our strict ISO Quality Standards. Firstly, our products achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Secondly, our long experience in the industry enables the design and manufacture of aesthetically beautiful and functional products. Finally, our products have a special treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

Dimensions: D1= ~ 14.9mm D2 = ~ 12.0mm D3 = ~ 17.7mm H1 = ~ 21.9mm H2 = ~ 9.4mm W = ~ 1.8mm