Jaw Jaw Rigging Screw Thimble Swage Long Eye Bolt SRMM
Potentially Very Useful Related Items…
Description
Jaw Jaw Rigging Screw Thimble Swage Long Eye Bolt SRMM kit suits a run of 3.2mm wire of 10 meters or less (hence the SR or Short Run). There a single tensioning point and two attachment points. attachments are two M6x1.0x40mm (Long Mini) Eye Bolts. These attach directly into metal posts (hence the MM or Metal to Metal).
Application
The first end of the run has a 5mm Jaw / Jaw Rigging Screw (for wire tensioning) swaged to the wire. The jaw of this attaches to the first Eye Bolt. The other Jaw attaches to the wire using a terminal loop formed with a ferrule and a swage. The Eye Bolt is fastens to a metal post or stud. The second end uses a terminal loop formed with a ferrule and a swage to attach to the second Eye Bolt which is fastened to the second post or wall.Wire may be installed through the intermediate posts and ‘cut to length’. Please make sure you expand the turnbuckles before measurement and drill the intermediate posts out to at least 4mm prior to swaging in place. Alternately, if you build the wire before you install it, then the length of a wire run is determined by the ‘inside to inside’ post measurement less a fixed amount which represents the distance between the attachment posts ‘taken up’ by the fittings when installed and adjusted properly.We recommend our Drill Taps (for drilling and tapping the metal posts) for installation of the Eye Bolts. Optionally, you can use Nutserts which afford an excellent structural alternative. Also – in your intermediate metal posts – we strongly recommend the use of stand grommets (flat areas) and angle grommets (ramps or stairs) for any non-stainless intermediate posts (to avoid a dissimilar alloys reaction).
Contents
- M6x1.0x40mm Eye Bolts Stainless Steel 316 Marine Grade (2 Included)
- 5mm Jaw/ Jaw Rigging Screw G316 Stainless Steel Marine Grade (1 Included)
- Nickel Coated Copper Ferrules (2 Included)
- G316 Stainless Steel Thimbles (2 Included)
Characteristics
- Balustrade Kit for 1 Runs/Wire
- Post Connections MM (Metal to Metal)
- Recommended Run Length <10M (SR)
- Swaging Method: Manual
- Wire Structure: 7×7, 7×19
- Diameter of Wire: 1.6mm, 2.0mm, 2.4mm, 3.2mm 4.0mm
- Section Orientation: Flat, Stairs, Angle
- Wire Orientation in a Section: Horizontal, Vertical