Jaw Jaw Rigging Screw Saddle Screw Infill Kit ISTT
These Jaw Jaw Rigging Screw Saddle Screw Infill Kit ISTT kits suits a single infill section (hence the IS or Infill Section) with the wire oriented in a Standard (Wave) Pattern. This suits sections of balustrading of approximately 900mm.
Potentially Very Useful Related Items…
Description
These Jaw Jaw Rigging Screw Saddle Screw Infill Kit ISTT kits suits a single infill section (hence the IS or Infill Section) with the wire oriented in a Standard (Wave) Pattern. This suits sections of balustrading of approximately 900mm. Firstly, the Jaw Jaw Rigging Screw provides tensioning and is normally positioned at 1 end of the run. Consequently, this makes only one end adjustable. Secondly, the saddles secure the wire along its circuitous path. Ultimately, the Saddles with self-tapping screws form all of the two attachment points. These attach directly into a timber posts (hence the TT or Timber to Timber). Optional versions of this Kit work with 2.4mm, 3.0mm, and 3.2mm Wire Rope to meet the New Zealand Building Code.
Application
We recommend cutting, building, installing (a single wire first) and reviewing your installation to ensure that it looks the way YOU want it to look once its complete.
Recommended Procedure Build in Place First step, secure the saddles at a spacing desired. Less than 90mm is recommended. Secondly, install the wire through the intermediate Screws and cut to length. Thirdly, before swaging, please expand all of the tensioners. Finally, this preserves the maximum adjust-ability.
Contents
- Jaw Jaw Rigging Screw Closed Turnbuckle Stainless Steel 316 Marine Grade (2 included)
- Nickel Plated Copper Ferrules (swages / crimps) Marine Grade (2 included)
- Thimbles Stainless Steel 316 Marine Grade (2 included)
- Saddles (eye straps) Stainless Steel 316 Marine Grade (18 included)
- Countersunk Screws (36 included)
- G316 7×7 Stainless Steel wire Rope (15M included)
Characteristics
- Balustrade Kit for 1 Vertical Infill Section < 1M
- Post Connections: based on fasteners TT (Timber to Timber)
- Recommended: Infill Section (IS)
- Swaging Method: Mechanical
- Permissible Wire Structure: 7×7, 7×19
- Diameter of Wire: 2.4mm; 3.0mm, 3.2mm
- Section Orientation: Flat, Stairs, Angle
- Wire Orientation in a Section: Horizontal, Vertical