: Wire Sling HEHE 6.0M 8.0mm 7X19 G316 Stainless Steel ##

Description

Wire Sling 6.0M Uncoated 8.0mm 7X19 G316 Stainless Steel

Materials per wire:

• 2 x 9.0mm Oval Copper Swage Sleeve
• 2 x 8.0mm Stainless Steel Thimbles
• Blank of 8.0mm 7×19 G316 Stainless Steel Wire Rope

Construction

• The length of each Hard Eye 94mm, which uses up 220mm of wire so an additional 126mm is needed to complete the “hard eye”
• Cut blanks to 6252mm = 6000 – (2*94mm) + (2*220mm)
• For each end:
  • Use the 9.0mm Oval Copper Swage Sleeve to hold the Hard Eye formed by the 8.0mm Stainless Steel Thimble, allowing ~10mm of wire to protrude on the backside of the swage sleeve
  • Using greased Swaging Dies are from the HP240-C – round shape for 9.0mm Oval Sleeves in the Hydraulic Bench Press and press the oval swage sleeve to ~4000PSI
    Swage the fitting progressively until it achieves a diameter of 18.0mm (+/- 0.4mm)