4.0mm 7×19 HS24 Tool Swages Thimbles Wire Use Kit

Description

4.0mm 7×19 -HS14 Tool, Wire, Swages, Thimbles – Wire Use Kit groups tools and fittings required for 4.0mm Stainless Steel Wire. This kit provides the basics components. Basically, you need:

• Wire (of some length) which sort of depends on the project.
• Ferrules (also called crimps or swages). These fasten either the wire to itself (and form a loop) or complete a splicing operation (at least 2 are recommended for security),
• Thimbles (also called eyelets) as these are the reinforcing strip of stainless steel metal that goes inside of a terminal loop formed by swaging a ferrule
• Swager (or swaging or crimping or welding tool) These are available in either a hydraulic form or a mechanical form and a
• Cutter which simply cuts the wire,

Usage: Using the 4.0mm 7×19 – HS24 Tool, Wire, Swages, Thimbles – Wire Use Kit is easy.  Simply cut the wire to length, slip one end into a ferrule, make a loop and slip the end back into the ferrule. We recommend using a thimble inside the loop. A thimble distributes the load on the loop.  Additionally, limits the radius through which the wire is pulled – thereby maintaining the MBS and load characteristics of the wire.

Wire Use Kits are also available for different sizes of Wire Rope.