Jaw Swage Rigging Screw Fork Terminal Eye Bolt Nutsert Eye Screw SRTM BlackTech
This kit suits a run of wire of 10 meters or less (hence the SR or Short Run) as there is a single tensioning point. The single tensioning point uses two attachment points which are an M6 x 1.0 x 15mm (Short) Mini Eye Bolt and a 6mm Short Lag Eye Screw. These attach directly into the two posts – one timber and one metal (hence the TM or Timber to Metal) – but its all BLACK
Description
BlackTech Jaw Swage Rigging Screw Fork Terminal Short Eye Bolt Nutsert Short Eye Screw SRTM kit is all 316 Stainless Steel, but its Black. And it suits a run of wire of 10 meters or less (hence the SR or Short Run) because there is a single tensioning pointy. The single tensioning point uses two attachment points which are an M6 x 1.0 x 15mm (Short) Mini Eye Bolt and a 6mm Short Lag Eye Screw. These attach directly into the two posts – one timber and one metal (hence the TM or Timber to Metal).
Application Drill the posts and install the nutserts using a Nutsert Tool. The first end of the run has a Jaw / Swage Rigging Screw (for wire tensioning) swaged to the wire. Attach the tensioner to the first 15mm Eye Bolt. The Mini Eye Bolt fastens to a metal post or plate. Attach the second end using a Fork Terminal swaged to the wire to attach to the 6mm Short Eye Screw which is fastened to the second post or wall.
Contents
- M6 x 1.0 x 15mm Mini Eye Bolt 316 BlackTech Stainless Steel Marine Grade (1 included)
- 6mm Short Lag Eye Screw 316 BlackTech Stainless Steel Marine Grade (1 included)
- Jaw/Swage Rigging Screw G316 BlackTech Stainless Steel Marine Grade (1 included)
- Fork Terminal G316 BlackTech Stainless Steel Marine Grade (1 included)
- M6 RHT Nutserts G304 BlackTech Stainless Steel Marine Grade (1 included)
Characteristics
- Balustrade Kit for 1 Runs/Wire
- Post Connections TM (Timber to Metal)
- Recommended Run Length <10M (SR)
- Swaging Method: Hydraulic
- Wire Structure: 1×19
- Diameter of Wire: 3.2mm
- Section Orientation: Flat, Stairs, Angle
- Wire Orientation in a Section: Horizontal