Dee Ring 10x52mm Zinc Plated Steel TRADE PACKS

Description

Tie Down Dee Rings Zinc Plated Steel are the reinforcement that provides structure to the end loop of a stainless or galvanised steel wire (or rope) run or a sling. When it is secured, the force of the bearing point is evenly distributed along the inner side of the ring and minimizes wear and stretch on the wire cable or sling. These Tie Down Rings are Commercial Grade Zinc Plated low Carbon steel and are NOT technically rated (SWL ~ 2.5T)

Usage: The Tie Down Dee Rings Zinc Plated Steel do not terminate wires or slings. Normally, a sling is fed through the ring which is then a fastening point. This ring can be joined with wire looped around a thimble (with the ring inside) and the end of the wire is threaded back through the swage. The swage and thimble are then secured using a manual crimping tool. The thimble forms the ‘loop’ secured by the ferrule attached to the ring.

Quality: All Low Cost Wire products meet our strict ISO Quality Standards. Firstly, our products achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Secondly, our long experience in the industry enables the design and manufacture of aesthetically beautiful and functional products. Finally, our products have a special treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

Dimensions: D = ~ 10.0mm A = ~ 52.0mm