Swage Bolt RHT LHT SRMM BlackTech
This kit suits a run of wire of 10 meters or less(hence the SR or Short Run). There is no turnbuckle. Attachments are two (RHT & LHT) Swage Bolts to attach directly into Metal posts (hence the MM or Metal to Metal). But its all BLACK
Potentially Very Useful Related Items…
Description
BlackTech Standard Swage Bolt RHT LHT SRMM Kit suits a short run of wire of 10 meters or less (SR = Short Run) but this one is ALL BLACK. Interestingly, this Quick-Fit Metal System is the most streamlined wire balustrade systems available on the market. Additionally, all expertly manufactured components use high quality materials. The Right Hand Thread (RHT) and Left Hand Thread (LHT) Terminal Swage Bolts form two attachment points. Together, the swage bolts as a turnbuckle when attached to a wire. Finally, the studs screw directly into Metal posts (MM = Metal to Metal)
Usage: Installation is easy. Firstly, the Standard Swage Bolt RHT LHT SRMM run has a RHT Swage Bolt swaged to the wire. This attaches to the first threaded metal post or wall. Secondly, the LHT Swage Bolt fastens to the wire’s other end. This then fastens to the second post or wall. Therefore, swage bolts attach to threads drilled and tapped into the metal. Thirdly, nutserts optionally replace drilled and tapped holes in the metal structure. Finally, cut the wire to length and install through the intermediate posts. Please make sure you cut the wire beforehand. It is VERY difficult to ‘cut to size’ once the Terminal Swage Bolts are installed. Drill the intermediate posts out to at least 4mm prior to swaging in place. Installation of this kit requires 2 people.
Contents
- BlackTech RHT Swage Bolt Stainless Steel 316 Marine Grade (1 included)
- BlackTech LHT Swage Bolt Stainless Steel 316 Marine Grade (1 included)
Characteristics
- Balustrade Kit for 1 Runs/Wire
- Post Connections MM (Metal to Metal)
- Recommended Run Length <10M (SR)
- Swaging Method: Hydraulic
- Wire Structure: 1×19 (BlackTech recommended)
- Diameter of Wire: 3.2mm
- Section Orientation: Flat
- Wire Orientation in a Section: Horizontal, Vertical
Quality: All Low Cost Wire products meet our strict ISO Quality Standards. Made with AISI Marine Grade stainless steel our product kits achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Firstly, this enables aesthetically beautiful and functional products. Secondly, our products have a special electro polished treatment for bright and smooth surface. Together, our wire and fittings deliver a truly top-shelf, long lasting product that will look new for ages