Safety Tether HEHE
Safety Tether HEHE

: Tool Lanyard HEHE 1500mm 3.2mm 7X19 G316 Stainless Steel ##

$0.00 Inc GST

SKU: 72129 Category:

Description

Tool Lanyard HEHE 3.2mm 1.5m 7X19 G316 Stainless Steel

Materials: for each wire

  • 2 – 3mm hourglass nickel coated copper swages
  • 2 – 3mm 316 stainless steel thimbles
  • a Blank of 3.2mm 7×19 G316 Stainless Steel Wire Rope

Construction:

  1. Cut Wire Blanks of 3.2mm 7×19 G316 Stainless Steel Wire Rope where T2T Target length is 1500mm
  2. The length of each Hard Eye 51mm, which uses up 114mm of wire so an additional 63mm is needed to complete the “hard eye”
  3. Cut blanks to 1626mm = 1500mm – (2*51mm) + (2*114mm)
  4. For each end:
    1. Use the 3.0mm Hourglass Nickel Coated Copper Swage Sleeve to hold the Soft Eye
    2. Using the Manual BenchSwager, let the springs clamp down on the sleeve in the #3 hole
    3. Slide in the 3.0mm Stainless Steel Thimble, allowing 1.5mm of wire to protrude on the backside of the swage sleeve
    4. Using the #3 hole in the Manual Bench Swager, progressively press the swage sleeve