6mm Black Coated 7x19 Stainless Steel Wire Height Safety Strap
6mm Black Coated 7x19 Stainless Steel Wire Height Safety Strap

: Tool Lanyard Wire HEHE 500mm Black Coated 3.2mm/4.0mm 7X19 G316 Stainless Steel ##

$0.00 Inc GST

SKU: 75286 Category:

Description

Tool Lanyard Wire HEHE Black PVC Coated 3.2mm/4.0mm 500mm 7X19 G316 Stainless Steel

Materials per wire:

  1. 2 x 3.2mm Hourglass Nickel Coated Copper Swage Sleeve
  2. 2 x 35m 8.0mm Black 4:1 Heatshrink
  3. 2 x 3.0mm Stainless Steel Thimbles
  4. Blank of 3.2mm/4.0mm 7×19 Black PVC Coated G316 Stainless Steel Wire Rope

Construction

  1. Each Hard Eye provides 40mm from bottom of uncrimped HG Sleeve (wrapped around the thimble) to the outside edge and the wire needs to extend past from the front of the swage sleeve by 95mm
  2. Cut blanks to 610mm = 500mm – (2*40mm) + (2*95.0mm) 
  3. Strip length is 95.0mm as the coating is removed in this version.
  4. Slip both pieces of the Heat Shrink over one end of the blank
  5. For each end:
    1. Use the 3.0mm Hourglass Nickel Coated Copper Swage Sleeve to hold the Soft Eye
    2. Using the Manual BenchSwager, let the springs clamp down on the sleeve in the #3 hole
    3. Slide in the 3.0mm Stainless Steel Thimble, allowing 1.0mm of wire to protrude on the backside of the swage sleeve
    4. Using the #3 hole in the Manual Bench Swager, progressively press the swage sleeve.
    5. Slide the Heat Shrink (x2) over the compressed swage sleeve forming the loop and change ends
  6. Apply heat using a Heat Gun to the Heat Shrink Tubing to complete the wire.