Black PVC Coated Anchor Strap
Black PVC Coated Anchor Strap

: Tool Lanyard Wire HEHE 1000mm Black Coated 3.2mm/4.0mm 7X19 G316 Stainless Steel ##

$0.00 Inc GST

SKU: 75290 Category:

Description

Tool Lanyard Wire HEHE Black Coated 3.2mm/4.0mm 1000mm 7X19 G316 Stainless Steel

Materials per wire:

  1. 2 x 3.2mm Nickel Coated Copper Hourglass Swage Sleeve
  2. 2 x 35mm 8.0mm Black Double Wall 4:1 Heatshrink
  3. 2 x 3.0mm Stainless Steel Thimbles
  4. Blank of Black Coated 3.2mm/4.0mm 7×19 G316 Stainless Steel Wire Rope

Construction

  1. Cut Wire Blanks of Black Coated 3.2mm/4.0mm 7×19 G316 Stainless Steel Wire Rope where CoE2CoE Target length is 1000mm
  2. Each Hard Eye provides 40mm from bottom of uncrimped HG Sleeve (wrapped around the thimble) to the outside edge.
  3. Creating Hard Eye, wire needs to extend past from the front of the swage sleeve by 95mm
  4. Cut blanks to 1110mm = 1000 – (2*40.0mm) + (2*95.0mm)
  5. Strip 95mm of coating from each end
  6. Slip both pieces of the Heat Shrink over one end of the blank
  7. For each end:
    1. Use the 3.2mm Hourglass Nickel Coated Copper Swage Sleeve to hold the Hard Eye, allowing 1.0mm of wire to protrude on the backside of the swage sleeve
    2. Using the 3.0mm Bench Swaging Jaws, press the oval swage sleeve to a round tube shape
    3. Slide the Heat Shrink over the (now) round swage sleeve forming the loop and change ends
  8. Apply heat using a Heat Gun to the Heat Shrink Tubing to complete the wire.