: Tool Lanyard HEHE 170mm 3.2mm 7X19 G316 Stainless Steel ##

Description

Tool Lanyard HEHE 170mm 3.2mm 7X19 G316 Stainless Steel

Materials: for each wire

• 2 – 3mm hourglass nickel coated copper swages
• 2 – 3mm 316 stainless steel thimbles
• a Blank of 3.2mm 7×19 G316 Stainless Steel Wire Rope

Construction:

1. 1. The length of each Hard Eye 40mm, which uses up 92mm of wire so an additional 52mm is needed to complete the “hard eye”
   2. Cut blanks to 274mm = 170 – (2*40mm) + (2*92mm)
   3. For each end:
      1. Use the 3.0mm Hourglass Nickel Coated Copper Swage Sleeve to hold the Soft Eye
      2. Using the Manual Bench Swager, let the springs clamp down on the sleeve in the #3 hole
      3. Slide in the 3.0mm Stainless Steel Thimble, allowing 1.5mm of wire to protrude on the backside of the swage sleeve
      4. Using the #3 hole in the Manual Bench Swager, progressively press the swage sleeve