6mm Black Coated 7x19 Stainless Steel Wire Height Safety Strap
6mm Black Coated 7x19 Stainless Steel Wire Height Safety Strap

: Anchor Strap HEHE 910mm 5.0mm/6.0mm Black 7X19 G316 Stainless Steel ##

$0.00 Inc GST

SKU: 83144 Category:

Description

Anchor Strop 910mm Black PVC Coated 5.0mm 7X19 G316 Stainless Steel

Materials per wire:

  1. 2 x 5mm Oval Copper Swage Sleeve
  2. 2 x 50mm 16.0mm Black 4:1 Heatshrink
  3. 2 x 5mm Stainless Steel Thimbles
  4. Blank of 5.0mm 7×19 Black PVC Coated G316 Stainless Steel Wire Rope

Construction

  1. The length of each Hard Eye 75mm (to the tip) or 65mm to the CoE, which uses up 175mm of wire.
  2. Cut blanks to xxxmm = 910 – (2*xxmm) + (2*xxmm) T2T or xxxmm = 910 – (2*xxmm) + (2*xxxmm)
  3. Strip length is xxmm as the coating is removed in this version.
  4. Slip both 50.0mm pieces of the Heat Shrink over one end of the blank
  5. For each end:
      1. Use the 5mm Oval Copper Swage Sleeve to hold the HardEye formed by the 5.0mm Stainless Steel Thimble, allowing ~5mm of wire to protrude on the backside of the swage sleeve
      2. Using greased Swaging Dies are from the HP240-C – round shape for 5mm Oval Copper Swage Sleeves in the Hydraulic Bench Press and press the oval swage sleeve to ~3000PSI
      3. Swage the fitting progressively until it achieves a diameter of 10.0mm (+/- 0.4mm)
      4. Slide the Heat Shrink over the compressed swage sleeve forming the loop and change ends
  6. Apply heat using a Heat Gun to the Heat Shrink Tubing to complete the wire