Clear Coated Safety wire SHSH
Clear Coated Safety wire SHSH

: Safety Wire SHSH-5mm 300mm 1.5mm 7X7 G316 Stainless Steel ##

$0.00 Inc GST

Available on back-order

SKU: 83207 Category:

Description

Safety Wire SHSH 300mm 1.5mm 7X7 G316 Stainless Steel

Materials per wire:

  1. 2 x 5.0mm Spring Hooks with Eyes
  2. 2 x 1.5mm Hourglass Ferrules of Nickel Plated Copper
  3. Blank of 1.5mm 7×7 G316 Stainless Steel Wire Rope

Construction:

  1. Each “Swaged on” Spring Hook uses up 55mm from the front of the swage sleeve when created using the SH as a ‘mandrel’ and wire needs to extend past the front of the swage sleeve by 45mm to complete the “soft eye”
  2. Cut blanks to 280mm = 300 – (2*55.0mm) + (2*45)
  3. Use 1.5mm Nickel Plated Copper Swages and Hold the Soft Eye formed by the SH tightly allowing ~1.0mm of wire to protrude on the backside of the swage sleeve
  4. Using the 1.5mm Dies of the Manual Bench Swager – press the sleeve 3 times – first by the mandrel catching the back edge of the sleeve, then at the front catching the front end of the sleeve and finish the middle for uniformity.
  5. repeat for the other side
  6. Align the faces of the Spring Hooks.