Anti Theft Garment Security Cable Black
Anti Theft Garment Security Cable Black

: Anti Theft Wire 1.5M Black 7X7 2.5mm/3.5mm G316 Stainless Steel ##

$0.00 Inc GST

SKU: 80970 Category:

Description

Anti Theft Wire 1.5M Black 7X7 2.5mm/3.5mm G316 Stainless Steel

Materials per wire:

  1. 1 x 3.2mm Aluminium Round Swage Sleeve
  2. 1 x 3.5mm Oval Aluminium Swage Sleeve
  3. 1 x 35mm Length of Black 8.0mm 4:1 Double Wall Adhesive Heat Shrink Tubing.
  4. Blank of Black PVC Coated 2.5mm/3.5mm 7×7 G316 Stainless Steel Wire Rope

Construction:

  1. Cut Wire Blanks of Black PVC Coated 2.5mm/3.5mm 7×7 G316 Stainless Steel Wire Rope where T2T Target length is 1.5M
  2. The Soft Eye uses up 71mm to bottom of uncrimped Oval Sleeve (relaxed in ‘natural shape’) to the outside edge when creating Soft Eye and wire needs to extend past from the front of the swage sleeve by 157mm to complete the “soft eye”
  3. Cut blanks to 1586mm = 1500 – (71mm) + (157mm)
  4. Slip the Heat Shrink over one end of the blank
  5. Use the 3.5mm Oval Aluminium Swage Sleeve to hold the Soft Eye formed to length, allowing 0.0mm of wire to protrude on the backside of the swage sleeve
  6. Using the Crimping jaws are from 240 – hex shape for 5.0mm stainless steel fittings in the Hydraulic Bench Press and press the oval swage sleeve to ~3000PSI
  7. Slide the Heat Shrink over the (now) hexagonal swage sleeve forming the loop and change ends
  8. Use the 3.2mm Round Aluminium Swage Sleeve to place an end stop on the other end, allowing 0.0mm of wire to protrude on the backside of the swage sleeve (if the fit is not ‘snug’, you may need to ‘crimp’ the round swage to hold it in place for the next step.
  9. Using the Crimping jaws are from 240 – hex shape for 4.0mm stainless steel fittings in the Hydraulic Bench Press and press the round swage sleeve to ~3000PSI
  10. Apply heat using a Heat Gun to the Heat Shrink Tubing covering the swage for the soft eye to complete the wire.