1300 601 514
Bolt Swage Rigging Screw M6 – 4.0mm G316 Stainless Steel

$13.28 $9.98 Inc GST

Sale!
G316 Stainless Steel Bolt Swage Rigging ScrewG316 Stainless Steel Bolt Swage Rigging Screw
Bolt Swage Rigging Screw Dimension Diagram

Bolt Swage Rigging Screw M6 – 4.0mm G316 Stainless Steel

$13.28 $9.98 Inc GST

Clear
SKU: 11173 Category:

Bolt Swage Rigging Screw M6 – 4.0mm G316 Stainless Steel

Bolt Swage Rigging Screw M6 – 4.0mm G316 Stainless Steel is a turnbuckle also known as a Bolt Swage Bottle Screw. They attach directly into metal posts and are ideal fasteners for projects requiring tensioners or turnbuckles for stainless steel wire rope.  A Rigging Screw is a closed body turnbuckle.  These fasten with a swaged bolt to the wire. They easily adjust on a secured post or frame. Consequently, they are easily attached to a threaded hole or nutsert to provide a professional and timeless look.

****

Usage: The Bolt Swage Rigging Screw will work with a range of fittings. They fasten with the stud into a threaded hole or rivnut. An anchor holes form the frame or area that will contain the wire. Generally, the Bolt Swage Rigging Screws work with other hydraulically swaged fittings.  A hydraulic swager crimps the stud to the appropriate diameter of wire rope.  With both right-hand and left-hand threads, the body of the Bolt Swage Rigging Screw M6 – 4.0mm can easily provide tension to your wire rope, without bending or stretching the wire. Tighten the body of the rigging screw with a c-spanner by rotating the body clockwise until tensioned to your needs.

* * * *

Quality: All Low Cost Wire products meet our strict ISO Quality Standards. Firstly, our products achieve the optimal balance between high tensile strength, fatigue resistance, abrasion resistance, and structural stability. Secondly, that long experience with wire rope manufacturing enables the design and manufacture of aesthetically beautiful and functional products. Finally, our products have a special treatment for bright and smooth surface of wire and cable to deliver a truly top-shelf, long lasting product that will look new for ages…

* * * *

Dimensions: D = ~ 6.0mm d = ~ 6.0mm L = ~ xxx.0mm L1 = ~ xxx.0mm A = ~ 8.0MM

Usage Tips

  • Bolt Swage Rigging Screws are ideal fasteners for projects requiring tensioners or turnbuckles for stainless steel wire rope between metal posts
  • The M6 "bolt" end allow these fasteners easily adjust on a secured post or frame, and can be attached to a threaded hole or a nutsert
  • Turnbuckles use both right-hand and left-hand threads. Firstly, these allow the body of the rigging screw to easily provide tension to your wire rope, without bending or stretching the wire.
  •  Tighten the body of the rigging screw with a c-spanner by rotating the body clockwise until tensioned to your needs.
  • The terminal is normally fastened to a post directly (threaded hole) or into a nutsert in the posts or uprights that form the frame or area that will contain the wire.
  • The rigging screw requires a hydraulic swager to crimp the fitting to the appropriate diameter of wire rope

Installation Considerations

  • Matching alloys is important and avoiding cross contamination is very important.
  • It is recommended that similar alloy fasteners are used so that a dis similar (corrosive) alloy reaction is avoided. Generally G304 Stainless Steel screws are used in timber (counter sunk screws in soft woods and pan head screws in hard woods). Generally, G304 Stainless Steel Rivets are used to attach fittings to metal surfaces (aluminium, mild steel, and stainless steel).
  • It may be necessary to (electrically) isolate and insulate fittings from the substrate material - again to avoid a galvanic (dissimilar alloys) reaction. Nylon washers can be very effective in this regard.
  • Additionally, all fittings and tools mentioned: c-spanner and hydraulic swagers are available through our store as well. These Rigging Screws are primarily sized according to the diameter of wire with which they work. Therefore, they are used in concert with other fittings. Consequently with a similar swaging style - these additional fittings work with the same diameter of wire rope.

Additional Relevant FAQs

Specifications

Pack Size

Single

Wire Diameter

4.0mm

Thread

M6

Material

Stainless Steel

Grade

AISI G316 (Marine)

Wire Structure

7×7, 1×19

Connection Style

Hydraulic Swaging

Attachment Substrate

Metal

Attachment Style

Machine Stud

Tension Style

Turnbuckle – Bolt/Swage Closed

Dimensions

D = ~ 6.0mm
d = ~ 6.0mm
L = ~ xxx.0mm
L1 = ~ xxx.0mm
A = ~ 8.0MM

Save your Quote
Your Quote will be saved for 30 days and you'll be given a link. Anyone with the link, can use it to retrieve your Quote within that 30 days
Back Save your Quote
Your Shopping Cart will be saved as a Quote with Product pictures and information, and Cart Totals. You can then send it to yourself, or a friend, with a link to retrieve it at any time. Thanks for Looking! ...the LCW Team
Your cart email sent successfully :)