Pro-Check Security Cable
Pro-Check Security Cable

: Safety Wire SESE 3.0M 2.5mm/3.5mm Black 7X7 G316 Stainless Steel ##

$0.00 Inc GST

SKU: 69487 Category:

Description

Safety Wire SESE Black Coated 2.5mm/3.5mm 3000mm 7X7 G316 Stainless Steel

Materials per wire:

  1. 2 x 3.5mm Oval Aluminium Swage Sleeve
  2. 2 x 35mm 8.0mm Black 4:1 Heatshrink
  3. Blank of 2.5mm/3.5mm Black PVC Coated G316 Stainless Steel Wire Rope

Construction

  1. Cut Wire Blanks of Black PVC Coated 2.5mm/3.5mm 7×7 G316 Stainless Steel Wire Rope where T2T Target length is 3000mm
  2. The Soft Eye uses up 71mm to bottom of uncrimped Oval Sleeve (relaxed in ‘natural shape’) to the outside edge when creating Soft Eye and wire needs to extend past from the front of the swage sleeve by 157mm to complete the “soft eye”
  3. Cut blanks to 3172mm = 3000 – (2*71mm) + (2*157mm)
  4. Slip both pieces of the Heat Shrink over one end of the blank
  5. For each end:
    1. Use the 3.5mm Oval Aluminium Swage Sleeve to hold the Soft Eye formed to the 60mm length, allowing 0.0mm of wire to protrude on the backside of the swage sleeve
    2. Using the Crimping jaws are from 240 – hex shape for 5.0mm stainless steel fittings in the Hydraulic Bench Press and press the oval swage sleeve to ~3000PSI
    3. Slide the Heat Shrink over the (now) hexagonal swage sleeve forming the loop and change ends
  6. Apply heat using a Heat Gun to the Heat Shrink Tubing to complete the wire.